AiM Loggers & Displays

The 5” MXS 1.2 Strada Compact Dash Display ‘Street Icons Version’, showing engine ECU data icons, lighting, fuel, oil, water etc. Perfect for Car builders

Available in two versions, standard version and street icon version, the Aim MXS 1.2 is the successor to the widely popular original MXS. It is fully configurable and able to show all the information coming from your ECU, the digital and analogue inputs, as well as the GPS module included in the kit.

MXS 1.2 Strada is available in two versions:

 Watch Your Data in Pre-Configured Pages

The MXS Strada has a high contrast TFT display and its visual quality is always optimal, as its ambient light sensor keeps the backlight at the best brightness levels. The dash is available in the “Street Icons” version needed by street users (fuel, oil, water temp etc.)

High Contrast TFT Display

The Aim MXS 1.2 Strada shows with RPM scale, all the data you need, like speed, water temperature and oil pressure, lap times and much more. You can choose the custom pages you wish, including up to four additional fields

A wide library of page styles, defining which data to be shown, their end of scale and measured units. Swapping between pages is easy with the Aim MXS Strada using the push buttons provided.

Flexible Shift Lights and Alarms

The 10 RGB shift lights and six alarm LED’s can be fully customized. The shift lights can be set to change a different for each gear when needed, while the alarms can be set to display certain colours in certain events. Along with that, you can choose which error message is displayed on the dash.

CAN Output

With the CAN Output you can send messages directly to an existing CAN network in order to improve the range of vehicle control possibilities.

Two Digital Outputs

Aim MXS Strada features a LOW SIDE type (switch to ground) digital output configurable in order to be activated/deactivated depending on the value of the analogue / digital inputs or on impulses coming from the ECU. This permits to automatically run external systems, i.e. to switch on/off additional lights, to activate/de-activate a cooling fan or circulation pumps, etc. when a certain event happens.

MXS Strada Connection Examples

Race Studio 3

Race Studio 3 is the heart of your MXS 1.2 Strada managing all your racing activities

Configuration

With Race Studio 3 you can create, modify, delete, import and export configurations with all channels, ECU drivers, Math channels, Display Pages, Digital outputs, Alarms, Shift Lights and all the expansions you need. You will also be able to manage the map of all your racing tracks and compare two laps watching the video recorded by SmartyCam HD cameras.

Analysis

With Race Studio 3 you can also analyse all data recorded by MXG and downloaded to your PC: graphs, histograms and tables will help you study your performance, providing an objective support to avoid mistakes and improve performances.

A Wide Range of data sources

MXG is the dashlogger designed to acquire and display data coming from your ECU, the internal accelerometer and gyro, as well as from the GPS08 Module included in the kit, analogue/digital inputs and predefined math channels. Performance and data acquired can also be incremented adding up to eight expansion modules. Its 7″ display makes it perfect for wide cockpits installation.

In The Box

• MXS 1.2 Strada
• USB cable
• 14 pin standard wiring
• 23 pin connector + contacts
• Software installation CD

Technical Specs

MXS Strada Technical Specifications

Display: 5" TFT
Resolution: 800x480 pixels
Contrast: 600:1
Brightness: 700cd/m2 - 1,100 Lumen
Ambient light sensor: Yes
Alarm LEDs: 6 RGB freely configurable
Shift light: 10 integrated freely configurable RGB LEDs
CAN connections: 2
ECU connections: CAN, RS232 or K-Line
ECU compatibility: + 1,000 industry leading ECUs
Expansion CAN connection: GPS, Channel Expansion, TC Hub, Lambda Controller, SmartyCam HD
Analogue inputs: 4 fully configurable, max 1,000 Hz each
Digital inputs: 1 speed input, lap signal, coil RPM input
Digital outputs: 1 (1 Amp max)
Second CAN: Yes
Body: Anodized Aluminum
Pushbuttons: Metallic
Connectors: 2 AMP connectors
Dimensions: 169.4x97x23 mm
Weight: 480 g
Power consumption: 400 mA
Waterproof: IP65

A Wide Range of Data Sources

Performance and data acquired can also be incremented adding up to eight expansion modules. The only difference between the two is the MXS is a compact 5″ display and Aim MXG 1.2 is a 7″ display, a better fit for wide cockpit installations.

CAN Output

With the CAN Output you can send messages directly to an existing CAN network in order to improve the range of vehicle control possibilities.

Freely Configurable Pages

You choose the information you want displayed. There is a library of custom pages for you to choose from, and in case you don’t find one you like, you can make your own page in the RaceStudio 3 program.

High Contrast 7″ TFT display

The high resolution, 7” display has a 1000:1 contrast ratio. On top of that, the built in ambient light sensor will keep the brightness optimal in any weather/lighting conditions.

Flexible Alarms

The MXG offers eight customizable RBG LED alarms. You get to choose the colour, frequency, conditions and the display text. These can be set up to meet your needs in the “Icons Management” tab in RaceStudio 3.

Two Digital Outputs

There are two digital outputs that can be automatically activated depending on the analogue or digital signals from the ECU. For example, they can be used to turn on or off a fan or additional lights when a certain event happens.

Integrated Shift Light Array

On top of the eight customizable alarms, the MXG comes with 10 RGB (red, green, blue) LED’s that can be personalised to any colour in any gear. It doesn’t get better than that.

Expand the system, according to your needs

Using the built-in CAN bus, you can add expansion modules to the MXG 1.2 to increment the performance and the data acquired:


GPS08 Module

Thanks to GPS08 Module (included in the kit) and its Race Studio 3 software, you can immediately get lap times and all data needed for engine tuning as well as for improving driving technique.

Channel Expansion

It permits to add 4 0-5Volt analogue channels for pressure, temperature sensors and potentiometers. Two of these channels can be configured to receive digital inputs like wheel speed.

TC Hub

It adds 4 K thermocouples.

LCU-One CAN

Wide band Lambda controller LCU-One, with Bosch LSU 4.9 probe, providing all Air/Fuel data and lambda value, allows to perfectly tune the carburetion.

SmartyCam HD cameras

The on-board cameras that overlays on videos the data sampled by your logger.

Connection Example

In the Box

• Aim MXG 1.2 Racing Dash Data logger
• 37 Pin standard harness
• GPS Module with cable 
• USB cable
• Software installation CD  

Technical Specifications

Display : 7″ TFT
Resolution : 800×480 pixels
Contrast : 1,000:1
Brightness : 700cd/m2 – 1,100 Lumen
Ambient light sensor : Yes
Alarm LEDs : 8 RGB freely configurable
Shift lights : 10 integrated freely configurable RGB LEDs
CAN connections : 3
ECU connections : CAN, RS232 or K-Line
ECU compatibility : + 1,000 industry leading ECUs
Expansion CAN connection : GPS, Channel Expansion, Thermocouple Expansions, Lambda Controller, SmartyCam HD
Analogue inputs : 8 fully configurable, max 1,000 Hz each
Digital inputs : 4 Speed inputs, lap signal, coil RPM input
Digital outputs : 2 (1 A max each)
Second CAN : Yes
Wi-Fi connection : Yes
Accelerometer : Internal Three-axial ± 5G + Three-axial Gyroscope+ 3 axis magnetometer
Internal memory : 4 GB
Body : Anodized Aluminum
Pushbuttons : Metallic
Connectors : 2 Motorsport connectors + 1 Binder connector
Power consumption : 400 mA
Dimensions : 237×127.6×26 mm
Weight : 950 g
Waterproof : IP65

The Formula Steering Wheel 3 is Specifically designed for Formula and Sports cars. A clear, precise and configurable display, shows data from EVO4S or EVO5.

Aim Formula Steering Wheel 3

Specifically Designed for Formula and Sports Cars

Aim Formula Steering Wheel 3 has been specifically designed for Formula and Sports cars. It offers the opportunity to see in real time, all the information acquired by EVO4S or EVO5 loggers in a typical “racing” look.

Connection Examples

A flexible display for you data and alerts

The new Formula Steering Wheel 3 features a small, fully configurable graphical display, showing the data sampled by EVO4S or EVO5 with a precise and clear view of the screen data. You can keep constantly under control, lap times and all values coming from the ECU, from the accelerometers and from the GPS (included in EVO4S/EVO5 kits).

Individually configurable LED’s

Six RGB shift lights can be configured for each gear, choosing LED colour and RPM threshold values which will turn it on/off. Alarms LED’s are managed in a very flexible way: you can choose the event that generates the alarm, the LED behaviour (blinking frequency and colour) when the alarm appears and the conditions for its switch-off. A warning message can also be shown.

Easy Configuration

Configuration of Shift lights, alarms and customized data pages is intuitive and immediate using the Race Studio 3 software.

Up to 9 pages showing the data you want, as you want it

You can swap among pages showing lap times and data in a 100% customizable way, you just choose your data and create your pages displaying up to 4 fields each. The “RPM and Lap Time” page layout is also available to display RPM Graph, Lap Time and two channels of your choice.

Lap Times

You can visualise the rolling time, or static or predictive lap time (as an absolute value or as a difference vs. the Best Lap).

Highlight Your Performance

A key-data summary is available at the end of each session: the three best laps of the session with their times, min/max speed and min/max RPM’s. In the following page you can also see a list of all the laps of the session.

Switch buttons for external functions

Formula Steering Wheel 3 also features switch buttons to remote 4 functions among the options available in your car, like speed limiter, traction control, neutral, etc. Being electrically isolated from the others, each button operates autonomously.

Optional Paddle Shifts

Formula Steering Wheel 3 features optional paddle shifts.

Robust, Comfortable and Reliable

Aim Formula Steering Wheel 3 is:

• Robust, for its anodised aluminium chassis.
• Comfortable and ergonomic: maximum grip is guaranteed by its shape and its finishing with hand-sewn shammy leather.
• Reliable, with its back-lit display and waterproof structure it can be used in all conditions of light and weather.

In the box

• Formula steering wheel 3,
• CAN cable for logger/ECU Bridge connection
• Free cables.

Technical Specifications

Dimensions: 270x183x48.2 mm (270x183x67 mm with paddle shifts)
Alarms/Functions: 6 shift light leds, 4 configurable alarm LED's, 4 remote functions
Chassis: Anodised aluminium
Finishing : Hand-sewn shammy leather

The Aim 5" GS-Dash Compact Car Display. Shows data from the Aim EVO4S and EVO5. It displays engine ECU, GPS, G’s and other sensor data.

Perfect display for the Aim EVO4S and EVO5

Easy and Instant Readability

The wide 268X128 pixel display makes it very easy to read despite its compact size. The user has a choice of seven background colours, while the integrated ambient light sensor keeps always brightness at an optimal level.

9 Data Pages

The GS-Dash allows you to choose the data you want displayed and is 100% customizable, keeping it simple and intuitive.

Fully Configurable Shift Lights and Alarm LED’s

The five LED shift lights can be changed to any colour and threshold. In addition, the four alarm LED’s can be configured to any colour and frequency desired.

Easy configuration

Shift Lights and alarms are to be configured using Race Studio 3 configuration panel.

Session Highlights

At the end of each session, the GS-Dash gives you top three lap times, min/max speed and min/mar RPM.

Keyboard Operation

The pop-up keyboard allows for:

• Enabling/disabling backlight
• Checking firmware version
• Deleting Stored Data
• Selecting your current track from a list of the nearest 30 available

Tough and Compact

Its durable body is made out of solid aluminum and the compact size makes it ideal for small space installations (small cars, bikes, etc.). The GS-Dash also has a IP65 waterproof rating.

Technical Specifications

Display resolution: 268 x 128 pixels
Backlight: 7 configurable RGB colours
Ambient light sensor: Yes
Shift lights: 5 configurable RGB LEDs
Alarm LEDs: 4 configurable RGB LEDs
Display pages: Fully configurable
Body: Aluminium
Pushbuttons: Metallic
Dimensions: 127.8 x 82 x 22.2 mm
Weight: 380 g
Waterproof:IP65

In The Box

GS-Dash with spiral cable

The 7" MXG 1.2 Racing Dash Display with ‘Standard Icons’ has a Superb high contrast mid-size TFT display with Customisable RGB shift lights for Racing.

The MXG 1.2 Strada has Reverse Camera option.

The MXG dash logger has an integrated shift array, configurable multicolour alarms, drag and drop multi page configuration, Wi-Fi and USB connectivity, GPS Module, inertial platform, analogue and digital inputs, digital outputs, Motorsport connectors, 4 GB of internal memory, 1,000Hz per channel sampling and support for over 1,000 ECU connections.

MXG Strada 1.2 samples data coming from your ECU, the GPS Module, the 9 axis inertial platform (accelerometer, gyro and magnetometer), 8 fully configurable analogue inputs, 6 digital inputs, predefined math channels and second CAN. Performance and data acquired can also be incremented adding up to eight expansion modules.

Freely configurable pages

 High Contrast TFT Display

Aim MXG Strada 1.2 features a high contrast TFT display: its visual quality is always optimal as its ambient light sensor keeps the back light at the best brightness levels. The dash is of course available also in the “Street Icons” version (fuel, oil, water temp etc.)

Flexible alarms & Custom Street Icons

MXG Strada 1.2 features five configurable RGB alarm LED's. You choose the conditions, you choose the colours.  Select a solid alarm or flashing one - and the flashing frequency, choose to have an accompanying text message, and set the alarm priorities. Select then the street icons you need among the wide list you will find in “Race Studio 3 – Icons Management” and set them up the way you prefer or according with your needs. Any of them is fully configurable and if this shouldn’t be enough, you will be able to upload and set up your own customised icons.

Two Digital Outputs

Camera inputs, also for mirror camera

Two analogue camera inputs are available, to swap your display into a mirror camera, through push button command or event management.

Integrated shift light array

Choose from a host of advanced multicoloured RGB shift light patterns that can be customised as you like and also for each unique gear when required.

Aim MXG Strada 1.2 Connection Examples

CAN output

With the CAN Output you can send messages directly  to an existing CAN network in order to improve  the range of vehicle control possibilities.

Race Studio 3

Analysis

With Race Studio 3 you can also analyse all data recorded by MXG Strada 1.2 and downloaded to your PC: graphs, histograms and tables will help you study your performance, providing an objective support to avoid mistakes and improve performances

Wide range of data sources

MXG Strada 1.2 is the dash logger designed to acquire and display data coming from your ECU, the internal accelerometer and gyro, as well as from the GPS08 Module included in the kit, analogue/digital inputs and predefined math channels. Performance and data acquired can also be incremented adding up to eight expansion modules. Its 7″ display makes it perfect for wide cockpits installation.

GPS Module

The GPS08 Module (included in the kit) connected via CAN makes lap time calculation and track position analysis very easy. Each Aim memory stores more than 200 world tracks start/finish line coordinates. As soon the dash/logger is switched on, the GPS08 Module will locate its position, identify track-line coordinates and start immediately sampling lap and split time.

If the track is not included in the database, it is always possible to add the start/finish line coordinates to the MXG Strada 1.2 via PC before going to the track, using the Race Studio 3 – Track Manager software.

Second CAN

An innovative feature is the CAN 2 line, managing data coming from your additional modules (i.e. ABS, traction control, infrared temperature sensors and more) This feature meets the requirements of a growing number of racers, as the use of additional modules is becoming quite common in a number of series.

Internal Accelerometer and Gyro

The internal three-axial accelerometer and the gyroscope provide a very powerful array of information. These force and motion sensors enable you to quantify the dynamic characteristics of your vehicle. Measuring acceleration forces and gyro rates can assist in determining how to improve your vehicle performances.

Math Channels

You immediately get Math Channels values. The dash logger can be configured to display those values (i.e. brake bias, calculated gear) in real time.

Technical Specifications

Display: 7” TFT
Resolution: 800×480 pixels
Contrast: 1000:1
Brightness: 700cd/m2 – 1,100 Lumen
Ambient light sensor: Yes
Alarm LEDs: 8 configurable RGB LEDs
Shift lights: 10 configurable RGB LEDs
CAN connections: 2
ECU connections: CAN, RS232 or K-Line
ECU compatibility: + 1,000 industry leading ECUs
Expansion CAN connection: GPS, Channel Expansion, TC Hub, Lambda Controller, SmartyCam HD
Analog inputs: 8 fully configurable, max 1,000 Hz each
Digital inputs: 1 speed input, coil RPM input
Digital outputs: 1 (1 A max)
Second CAN: Yes
Body: Anodized Aluminum
Pushbuttons: Metallic
Connectors: 2 AMP connectors + 1 Binder connector
Power consumption: 400 mA
Dimensions: 237×127.6×26 mm
Weight: 950 g
Waterproof: IP65

In the Box

1. MXG Strada 1.2
2. USB cable,
3. 14 pins standard wiring,
4. 23 pins connector + contacts,
5. software installation CD.

Reversing Camera

The Video In connector allows the connection of two different analog cameras, that may be activated as here down described.

This camera offers a couple of interesting options,

• The possibility to reverse the image
• The possibility to enable or disable the parking overlay view

read more

Downloads

User guide

Technical sheet

Digital outputs

Installation template (scaled 1:1)

Rear camera technical sheet

Pictures

Accessories

The 7” Aim MXG Strada Dash Display ‘‘Road Icons Version’, showing engine ECU data icons, lighting, fuel, oil, water etc. Perfect for road car builders.

The dash logger has an integrated shift array, configurable multi-color alarms, drag and drop multi page configuration, Wi-Fi and USB connectivity, GPS Module, inertial platform, analog and digital inputs, digital outputs, Motorsport connectors, 4 GB of internal memory, 1,000Hz per channel sampling and support for over 1,000 ECU connections.

MXG Strada 1.2 samples data coming from your ECU, the GPS Module, the 9 axis inertial platform (accelerometer, gyro and magnetometer), 8 fully configurable analog inputs, 6 digital inputs, predefined math channels and second CAN. Performance and data acquired can also be incremented adding up to eight expansion modules.

Freely configurable pages

 High Contrast TFT Display

Aim MXG Strada 1.2 features a high contrast TFT display: its visual quality is always optimal as its ambient light sensor keeps the back light at the best brightness levels. The dash is of course available also in the “Street Icons” version (fuel, oil, water temp etc.)

Flexible alarms & Custom Street Icons

MXG Strada 1.2 features five configurable RGB alarm LED's. You choose the conditions, you choose the colours.  Select a solid alarm or flashing one - and the flashing frequency, choose to have an accompanying text message, and set the alarm priorities. Select then the street icons you need among the wide list you will find in “Race Studio 3 – Icons Management” and set them up the way you prefer or according with your needs. Any of them is fully configurable and if this shouldn’t be enough, you will be able to upload and set up your own customised icons.

Two Digital Outputs

Camera inputs, also for mirror camera

Two analog camera inputs are available, to swap your display into a mirror camera, through pushbutton command or event management.

Integrated shift light array

Choose from a host of advanced multicoloured RGB shift light patterns that can be customised as you like and also for each unique gear when required.

Aim MXG Strada 1.2 Connection Examples

CAN output

With the CAN Output you can send messages directly  to an existing CAN network in order to improve  the range of vehicle control possibilities.

Race Studio 3

Analysis

With Race Studio 3 you can also analyse all data recorded by MXG Strada 1.2 and downloaded to your PC: graphs, histograms and tables will help you study your performance, providing an objective support to avoid mistakes and improve performances

Wide range of data sources

MXG Strada 1.2 is the dash logger designed to acquire and display data coming from your ECU, the internal accelerometer and gyro, as well as from the GPS08 Module included in the kit, analog/digital inputs and predefined math channels. Performance and data acquired can also be incremented adding up to eight expansion modules. Its 7″ display makes it perfect for wide cockpits installation.

GPS Module

The GPS08 Module (included in the kit) connected via CAN makes lap time calculation and track position analysis very easy. Each Aim memory stores more than 200 world tracks start/finish line coordinates. As soon the dash/logger is switched on, the GPS08 Module will locate its position, identify track-line coordinates and start immediately sampling lap and split time.

If the track is not included in the database, it is always possible to add the start/finish line coordinates to the MXG Strada 1.2 via PC before going to the track, using the Race Studio 3 – Track Manager software.

Second CAN

An innovative feature is the CAN 2 line, managing data coming from your additional modules (i.e. ABS, traction control, infrared temperature sensors and more) This feature meets the requirements of a growing number of racers, as the use of additional modules is becoming quite common in a number of series.

Internal Accelerometer and Gyro

The internal three-axial accelerometer and the gyroscope provide a very powerful array of information. These force and motion sensors enable you to quantify the dynamic characteristics of your vehicle. Measuring acceleration forces and gyro rates can assist in determining how to improve your vehicle performances.

Math Channels

You immediately get Math Channels values. The dash logger can be configured to display those values (i.e. brake bias, calculated gear) in real time.

Technical Specifications

Display: 7” TFT
Resolution: 800×480 pixels
Contrast: 1000:1
Brightness: 700cd/m2 – 1,100 Lumen
Ambient light sensor: Yes
Alarm LEDs: 8 configurable RGB LEDs
Shift lights: 10 configurable RGB LEDs
CAN connections: 2
ECU connections: CAN, RS232 or K-Line
ECU compatibility: + 1,000 industry leading ECUs
Expansion CAN connection: GPS, Channel Expansion, TC Hub, Lambda Controller, SmartyCam HD
Analog inputs: 8 fully configurable, max 1,000 Hz each
Digital inputs: 1 speed input, coil RPM input
Digital outputs: 1 (1 A max)
Second CAN: Yes
Body: Anodized Aluminum
Pushbuttons: Metallic
Connectors: 2 AMP connectors + 1 Binder connector
Power consumption: 400 mA
Dimensions: 237×127.6×26 mm
Weight: 950 g
Waterproof: IP65

In the Box

1. MXG Strada 1.2
2. USB cable,
3. 14 pins standard wiring,
4. 23 pins connector + contacts,
5. software installation CD.

Reversing Camera

The Video In connector allows the connection of two different analog cameras, that may be activated as here down described.

This camera offers a couple of interesting options,

• The possibility to reverse the image
• The possibility to enable or disable the parking overlay view

read more

Downloads

User guide

Technical sheet

Digital outputs

Installation template (scaled 1:1)

Rear camera technical sheet

Pictures

Accessories

The 7” MXL2 Dash Data Logger acquires data from your engine ECU, the internal accelerometer, gyro, as well as the GPS08 Module in the kit.

The MXL2 Racing Dash Logger is designed with the professional and the amateur racer in mind. Its simplified design makes configuration and usage a breeze. For professionals, the MXL2 can support up to eight analogue sensor inputs to measure things such as pressures, thermo-resistances and even your custom sensors. All these are recorded up to 1000 times per second.

A wide range of data sources

One of the main features of the MXL2 is its ability to receive a wide array of data from numerous different sources. It can display data from your ECU, the GPS08 Module included in the kit, and even from the built-in gyro and accelerometer, all in real time. With the ability to add up to eight expansion modules, the possibilities are endless.

Custom pages

With up to eight custom pages, you now have the ability to see exactly what is important to you on the screen. There is a vast array of different pages available in our library, or you can create your own.

Sharp liquid crystal display

The LCD screen is sharper than ever. It has nearly double the white ratio compared to its predecessor. You now have the choice of a red or white background colour, and when you combine that with the built in ambient light sensor, the MXL2 can be viewed clearly in any lighting conditions.

Flexible alarms

The MXL2 has six LED’s that can be completely customized to any colour and flashing frequency desired. They can also be configured to turn on/off depending on ECU values, analogue or digital inputs, GPS information, etc. But wait, there’s more. The alarms can also be configured to flash red on the screed along with a written message.

Two Digital Outputs

Two digital outputs are available on the MXL2, each with an output of one amp at 12 volts. This means that a wide array of external systems can be configured to turn on/or off when a certain event happens, including things such turning, on/off additional lights, activate/ deactivate cooling fans or circulation pumps, and so on.

Integrated Shift Light Array

The 10 integrated LED shift lights are one of the most recognizable features of the MXL2. The RGB LED’s can be customized to any colours for one or all gears.

MXL2 Connection Examples 

Race Studio 3

Race Studio 3 is the heart of your MXL2, managing all your racing activities. The Race Studio 3 can create, modify, delete, import and export configurations with all channels, ECU drivers, Math channels, Display Pages, Digital outputs, Alarms, Shift Lights and all the expansions you need. You will also be able to manage the map of all your racing tracks and compare two laps watching the video recorded by SmartyCam HD cameras.

WIFI Connectivity

Your MXL2 Racing Dash Logger can be connected to RaceStudio 3 on your PC wirelessly via the secure 802.11 Wi-Fi connection.

Data Sources

ECU Connections

Aim MXL2 acquires data from the ECU of your vehicle.The list of available ECU drivers is constantly updated and upgraded and is published in our support site which include over 1000 different ECU’s, either Stock and Racing. They are sorted by manufacturer/vehicle model and for each ECU, you will find the proprietary communication protocols, including the standard OBDII ones.
From a hardware point of view, MXL2 manages the following data lines:

• CAN
• RS232
• K-Line

Analog Digital Inputs

MXL2 has eight analog inputs, recorded up to 1000 times per second each. You can connect and monitor all kinds of sensors, like:

Ratiometric potentiometers

• Pressure sensors
• Thermo-resistances
• K-type thermocouple and many others, all your custom sensors included.

MXL2 also features six digital inputs

Four speed signals – MXL2 can receive the speed signal from the ECU, from the GPS and from the four wheel sensors.
RPM – MXG can receive the RPM signal from the ECU or from a digital input connected to a square wave signal (8 to 50 V) or to a low voltage (from 150 to 400 V) of the coil.
Lap signal – Lap and split times are sampled by the GPS (included in the kit) or via optical receiver/transmitter.

MXL2 GPS Module

The GPS08 Module (included in the kit) connected via CAN to the MXL2 makes lap time calculation and track position analysis very easy. Each Aim MXG memory stores more than 200 world tracks start/finish line coordinates: as soon as Aim MXL2 is switched on, the GPS08 Module will locate its position, identify track-line coordinates and start immediately sampling lap and split time.

If the track is not included in the database, it is always possible to add the start/finish line coordinates to the Aim MXL2 via PC before going to the track, using the Race Studio 3 – Track Manager software.

MXL2 Second CAN

An innovative MXL2 feature is its CAN 2 line, managing data coming from your additional modules (i.e. ABS, traction control, infrared temperature sensors and more). This feature meets the requirements of a growing number of racers, as the use of additional modules is becoming quite common in a number of series.

MXL2 Internal Accelerometer and Gyro

The internal three-axial accelerometer and the gyroscope provide the MXL2 a very powerful array of information. These force and motion sensors enable you to quantify the dynamic characteristics of your vehicle. Measuring acceleration forces and gyro rates can assist in determining how to improve your vehicle performances.

MXL2 Math Channels

With MXL2 you immediately get Math Channels values. The dash logger can be configured to display those values (i.e. brake bias, calculated gear) in real time.

-----------------------------------------------

Technical Specifications

Display: LCD display + graphical portion
Backlight: White or red
Ambient light sensor: Yes
Alarm LEDs: 6 RGB freely configurable
Shift lights: 10 integrated freely configurable RGB LEDs
CAN connections: 3
ECU connections: CAN, RS232 or K-Line
ECU compatibility: + 700 industry leading ECUs
Expansion: CAN connection GPS, Channel Expansion, Thermocouple Expansions, Lambda Controller,
SmartyCam
Analog inputs: 8 fully configurable, max 1,000 Hz each
Digital inputs: 4 Speed inputs, lap signal, coil RPM input
Digital outputs: 2 (1 Amp max each)
Accelerometer: Internal Three-axial ± 5G + Three-axial Gyroscope
Internal memory: 4 GB
Body: Anodized Aluminum
Pushbuttons: Metallic
Connectors: 2 Motorsport connectors
Dimensions: 187.8x103x21 mm
Weight: 530 g
Power consumption: 400 mA
Waterproof: IP6

In the box

1. Aim MXL2 Car Racing Dash Logger
2. 37 Pin Standard Harness 
3. GPS Module with cable
4. USB Data lead
5. Software installation CD

Accessories

Aim GPS08 Module GPS Roof Mount Version for Car Racing

£240.00

Downloads

User manual ver. 1.02

Technical sheet and product history ver. 1.07

Harness for MXL2/MXG/MXS ver. 1.06

Harness of 22 pins Deutsch connector with 1 thermocouple for MXL2/MXG/MXS ver. 1.00

Harness of 22 pins Deutsch connector with 2 thermocouples for MXL2/MXG/MXS ver. 1.00

Harness of 37 pins Deutsch connector with 1 thermocouple for MXL2/MXG/MXS ver. 1.00

Harness of 37 pins Deutsch connector with 2 thermocouples for MXL2/MXG/MXS ver. 1.00

UBS adapter for MXL2/MXG/MXS ver. 1.05

Installation template (scaled 1:1)

MXL-MXL2 generic adapter harness

MXL-MXL2 Radical adapter harness

Remote buttons interface

Digital outputs ver. 1.03

Pictures

The 6” MXP Dash Data Logger has integrated shift array, configurable multi-colour alarms, Wi-Fi & USB connectivity, GPS, inertial platform, analogue, both digital inputs, and outputs.

There is also a “strada” version available for use in road cars. It has all the same characteristics minus the logging features.

Some of the features of the MXP include:

Wi-Fi and USB connectivity

GPS module

Analogue and digital inputs

1000Hz channel sampling from the over 1000 ECU’s stored in its database

And much, much more

Freely configurable pages

You can define all the custom pages you wish, choosing among a wide library of page styles, defining which data to be shown, their end of scale and measure units. Swapping between pages can be managed pushing one or two push buttons.

 High Contrast TFT Display

The MXP features an amazingly clear, high contrast 6” TFT display. The brightness optimized via a built in ambient light sensor. To mimic a regular dash, the display can be viewed in the “street icons” version.

Flexible alarms & custom street icons

The MXP features five RGB LED’s that can be fully customized. From the colour, to the frequency, and even the error messages displayed on the screen, it is all up to you. This can be done in the Race Studio 3 program, under the “Icons Management” tab.

Two Digital Outputs

Two digital outputs are offered with the MXP. These outputs can be connected to a series of external systems such as additional lights or turning a cooling fan on or off when a certain even happens.

Camera inputs, also for mirror camera

There are two analogue camera inputs available on the MXP. This gives you the ability to instantly turn your display into a mirror camera at the push of a button.

Integrated shift light array

Just like the warning lights, the 10 integrated RGB LED are fully customizable. You can choose the right colour for the right gear. They are located at the top of the display and are highly visible in any lighting conditions.

Aim MXP Connection Examples

CAN output

With the CAN Output you can send messages directly  to an existing CAN network in order to improve  the range of vehicle control possibilities.

Race Studio 3

The RaceStudio 3 platform makes sense of all the different inputs coming in. It allows the user to see, create, modify and even delete information from all channels. These include ECU signals, digital and analogue signals, alarms, shift lights, display pages, etc. Basically, it is the brains of the operation.

Analysis

With Race Studio 3 you can also analyse all data recorded by MXS 1.2 and downloaded to your PC: graphs, histograms and tables will help you study your performance, providing an objective support to avoid mistakes and improve performances

Wi-Fi connectivity

The MXP makes it easy to upload data to your PC with its secure 802.11 Wi-Fi connection. This can be done from up to 50 metres away.

Wide range of data sources

Analog Digital Inputs

MXL2 has eight analogue inputs, recorded up to 1000 times per second each. You can connect and monitor all kinds of sensors, like:

Ratiometric potentiometers
Pressure sensors
Thermo-resistances
K-type thermocouple and many others, all your custom sensors included.

Features six digital inputs

Four speed signals – It can receive the speed signal from the ECU, from the GPS and from the four wheel sensors.

• RPM – can receive the RPM signal from the ECU or from a digital input connected to a square wave signal (8 to 50 V) or to a low voltage (from 150 to 400 V) of the coil.
• Lap signal – Lap and split times are sampled by the GPS (included in the kit) or via optical receiver/transmitter.

GPS Module

The GPS08 Module (included in the kit) connected via CAN makes lap time calculation and track position analysis very easy. Each Aim memory stores more than 200 world tracks start/finish line coordinates. As soon the dash/logger is switched on, the GPS08 Module will locate its position, identify track-line coordinates and start immediately sampling lap and split time.

If the track is not included in the database, it is always possible to add the start/finish line coordinates to the Aim MXL2 via PC before going to the track, using the Race Studio 3 – Track Manager software.

Second CAN

An innovative feature is the CAN 2 line, managing data coming from your additional modules (i.e. ABS, traction control, infrared temperature sensors and more) This feature meets the requirements of a growing number of racers, as the use of additional modules is becoming quite common in a number of series.

Internal Accelerometer and Gyro

The internal three-axial accelerometer and the gyroscope provide a very powerful array of information. These force and motion sensors enable you to quantify the dynamic characteristics of your vehicle. Measuring acceleration forces and gyro rates can assist in determining how to improve your vehicle performances.

Math Channels

You immediately get Math Channels values. The dash logger can be configured to display those values (i.e. brake bias, calculated gear) in real time.

Technical Specifications

Display: 6” TFT
Resolution: 800x480 pixels
Contrast: 600:1
Brightness: 700cd/m2 - 1,100 Lumen
Ambient light sensor: Yes
Alarm display icons: Yes, freely configurable
Alarm LEDs: 5 configurable RGB LEDs
Shift lights: 10 configurable RGB LEDs
CAN connections: 3
ECU connections: CAN, RS232 or K-Line
ECU compatibility: 1,000+ industry leading ECUs
Expansion CAN connection: GPS Module, Channel Expansion, TC Hub, Lambda Controller, SmartyCam HD
Analog inputs: 8 fully configurable, max 1,000 Hz each
Digital inputs: 4 Speed inputs, lap signal, coil RPM input
Digital outputs: 2 (1 A max each)
Second CAN: Yes
Wi-Fi connection: Yes
Inertial platform: Internal 3 axis ±5G accelerometer + 3 axis gyro + 3 axis magnetometer
Internal memory: 4 GB
Body: Anodized Aluminum
Pushbuttons: Metallic
Connectors: 2 Motorsport connectors + 1 Binder connector
Power consumption: 400 mA
Dimensions: 189.6 x 106.4 x 24.9 mm
Weight: 640 g
Waterproof: IP65

XA5MXPSTRA010 – MXP Strada with CAN harness (ECU)
XA5MXPSTRA020 – MXP Strada with OBD harness CAN+K (ECU)
XA5MXPSTRI010 –  MXP Strada Street icons version with CAN harness (ECU)
XA5MXPSTRI020 –  MXP Strada Street icons version with OBD harness CAN+K (ECU)

In the Box

1. MXP Dash Display
2. 37 Pin Standard Harness
3. GPS Module with Cable 
4. USB Cable
5. Software Installation CD  

Downloads

MXP Technical sheet

MXP Strada Technical sheet

Digital outputs

MXP Pictures

MXP Strada Pictures

Mirror Camera

Standard harness for MXS Strada ver. 1.01:

• Standard harness 23 pins AMP connector (serial protocol)
• Standard harness 14 pins AMP connector (CAN protocol)
• USB adapter cable

Harness 14 pins AMP connector – OBDII version ver. 1.00 (CAN and K-Line protocol)

Installation template (scaled 1:1)

Digital outputs ver. 1.03

Remote buttons interface 

Reversing Camera

The Video In connector allows the connection of two different analog cameras, that may be activated as here down described.

This camera offers a couple of interesting options,

• The possibility to reverse the image
• The possibility to enable or disable the parking overlay view

read more

Accessories

The 6” Aim MXP Strada Dash Display with ‘‘Road Icons Version’, showing engine ECU data icons, lighting, fuel, oil, water etc. Perfect for Car builders.

The dash logger has an integrated shift array, configurable muliticolour alarms, drag and drop multi page configuration, Wi-Fi and USB connectivity, GPS Module, inertial platform, analogue and digital inputs, digital outputs, Motorsport connectors, 4 GB of internal memory, 1,000Hz per channel sampling and support for over 1,000 ECU connections.

MXP Strada samples data coming from your ECU, the GPS Module, the 9 axis inertial platform (accelerometer, gyro and magnetometer), 8 fully configurable analogue inputs, 6 digital inputs, predefined math channels and second CAN. Performance and data acquired can also be incremented adding up to eight expansion modules.

Aim MXP Strada is available in two versions:

Freely configurable pages

 High Contrast TFT Display

Aim MXP features a high contrast TFT display: its visual quality is always optimal as its ambient light sensor keeps the back light at the best brightness levels. The dash is of course available also in the “Street Icons” version (fuel, oil, water temp etc.)

Flexible alarms & custom street icons

MXP features five configurable RGB alarm LED's. You choose the conditions, you choose the colours.  Select a solid alarm or flashing one - and the flashing frequency, choose to have an accompanying text message, and set the alarm priorities. Select then the street icons you need among the wide list you will find in “Race Studio 3 – Icons Management” and set them up the way you prefer or according with your needs. Any of them is fully configurable and if this shouldn’t be enough, you will be able to upload and set up your own customised icons.

Two Digital Outputs

Camera inputs, also for mirror camera

Two analogue camera inputs are available, to swap your display into a mirror camera, through push button command or event management.

Integrated shift light array

Choose from a host of advanced multicoloured RGB shift light patterns that can be customised as you like and also for each unique gear when required.

Aim MXP Strada Connection Examples

CAN output

With the CAN Output you can send messages directly  to an existing CAN network in order to improve  the range of vehicle control possibilities.

Race Studio 3

The 6” MXP Strada Dash Display with ‘Standard Icons’. Superb high contrast mid-size TFT display with Customisable RGB shift lights for Racing. Reverse Camera option.

The dash logger has an integrated shift array, configurable multi-colour alarms, drag and drop multi page configuration, Wi-Fi and USB connectivity, GPS Module, inertial platform, analogue and digital inputs, digital outputs, Motorsport connectors, 4 GB of internal memory, 1,000Hz per channel sampling and support for over 1,000 ECU connections.

MXP Strada samples data coming from your ECU, the GPS Module, the 9 axis inertial platform (accelerometer, gyro and magnetometer), 8 fully configurable analogue inputs, 6 digital inputs, predefined math channels and second CAN. Performance and data acquired can also be incremented adding up to eight expansion modules.

Aim MXP Strada is available in two versions:

Freely configurable pages

 High Contrast TFT Display

Aim MXP features a high contrast TFT display: its visual quality is always optimal as its ambient light sensor keeps the back light at the best brightness levels. The dash is of course available also in the “Street Icons” version (fuel, oil, water temp etc.)

Flexible alarms & custom street icons

MXP features five configurable RGB alarm LED's. You choose the conditions, you choose the colours.  Select a solid alarm or flashing one - and the flashing frequency, choose to have an accompanying text message, and set the alarm priorities. Select then the street icons you need among the wide list you will find in “Race Studio 3 – Icons Management” and set them up the way you prefer or according with your needs. Any of them is fully configurable and if this shouldn’t be enough, you will be able to upload and set up your own customised icons.

Two Digital Outputs

Camera inputs, also for mirror camera

Two analogue camera inputs are available, to swap your display into a mirror camera, through push button command or event management.

Integrated shift light array

Choose from a host of advanced multicoloured RGB shift light patterns that can be customised as you like and also for each unique gear when required.

Aim MXP Strada Connection Examples

CAN output

With the CAN Output you can send messages directly  to an existing CAN network in order to improve  the range of vehicle control possibilities.

Race Studio 3

Analysis

With Race Studio 3 you can also analyse all data recorded by MXS 1.2 and downloaded to your PC: graphs, histograms and tables will help you study your performance, providing an objective support to avoid mistakes and improve performances

Wide range of data sources

Analogue Digital Inputs

MXL2 has eight analogue inputs, recorded up to 1000 times per second each. You can connect and monitor all kinds of sensors, like:

Ratiometric potentiometers
Pressure sensors
Thermo-resistances
K-type thermocouple and many others, all your custom sensors included.

Features six digital inputs

Four speed signals – It can receive the speed signal from the ECU, from the GPS and from the four wheel sensors.

• RPM – can receive the RPM signal from the ECU or from a digital input connected to a square wave signal (8 to 50 V) or to a low voltage (from 150 to 400 V) of the coil.
• Lap signal – Lap and split times are sampled by the GPS (included in the kit) or via optical receiver/transmitter.

GPS Module

The GPS08 Module (included in the kit) connected via CAN makes lap time calculation and track position analysis very easy. Each Aim memory stores more than 200 world tracks start/finish line coordinates. As soon the dash/logger is switched on, the GPS08 Module will locate its position, identify track-line coordinates and start immediately sampling lap and split time.

If the track is not included in the database, it is always possible to add the start/finish line coordinates to the Aim MXL2 via PC before going to the track, using the Race Studio 3 – Track Manager software.

Second CAN

An innovative feature is the CAN 2 line, managing data coming from your additional modules (i.e. ABS, traction control, infrared temperature sensors and more) This feature meets the requirements of a growing number of racers, as the use of additional modules is becoming quite common in a number of series.

Internal Accelerometer and Gyro

The internal three-axial accelerometer and the gyroscope provide a very powerful array of information. These force and motion sensors enable you to quantify the dynamic characteristics of your vehicle. Measuring acceleration forces and gyro rates can assist in determining how to improve your vehicle performances.

Math Channels

You immediately get Math Channels values. The dash logger can be configured to display those values (i.e. brake bias, calculated gear) in real time.

Technical Specifications

Display: 6” TFT
Resolution: 800x480 pixels
Contrast: 600:1
Brightness: 700cd/m2 - 1,100 Lumen
Ambient light sensor: Yes
Alarm display icons: Yes, freely configurable
Shift lights: 10 integrated freely configurable RGB LEDs
Alarm LED: 5 integrated freely configurable RGB LEDs
CAN connections: 3
ECU connection: CAN, RS232 or K-Line
ECU compatibility: 1,000+ industry leading ECUs
Expansion CAN connection: GPS Module, Channel Expansion, Thermocouples expansions,Lambda Controller, SmartyCam HD
Analog inputs: 8 fully configurable, max 1,000 Hz each
Digital inputs: 1 Speed input, coil RPM input
Digital outputs: 1 (1 A max)
Second CAN: Yes
Body: Anodized Aluminum
Pushbuttons: Metallic
Connectors: 2 AMP connectors
Power consumption: 400 mA
Dimensions: 189.6 x 106.4 x 24.9 mm
Weight: 640 g
Waterproof: IP65

XA5MXPSTRA010 – MXP Strada with CAN harness (ECU)
XA5MXPSTRA020 – MXP Strada with OBD harness CAN+K (ECU)
XA5MXPSTRI010 –  MXP Strada Street icons version with CAN harness (ECU)
XA5MXPSTRI020 –  MXP Strada Street icons version with OBD harness CAN+K (ECU)

In the Box

1. MXP Strada Dash Display Standard Icons
2. USB cable,
3. 14 pins standard wiring,
4. 23 pins connector + contacts,
5. software installation CD.

Reversing Camera

The Video In connector allows the connection of two different analog cameras, that may be activated as here down described.

This camera offers a couple of interesting options,

• The possibility to reverse the image
• The possibility to enable or disable the parking overlay view

read more

Downloads

User guide

Technical sheet

Digital outputs

Installation template (scaled 1:1)

Rear camera technical sheet

Pictures

Standard harness for MXP Strada ver. 1.01:

• Standard harness 23 pins AMP connector (serial protocol)
• Standard harness 14 pins AMP connector (CAN protocol)
• USB adapter cable

Harness 14 pins AMP connector – OBDII version ver. 1.00 (CAN and K-Line protocol)

Installation template (scaled 1:1)

Digital outputs ver. 1.03

Remote buttons interface 

Accessories

The 5” MXS 1.2 Strada is a Compact Dash Display with Standard Icons. Superb high contrast TFT display with Customisable RGB shift lights for Racing.

The Aim MXS 1.2 Strada Dash Display Standard Icons is the the evolution of MXS Strada which is a  5″ color display with great visual impact. It is configurable to show lap times and all the info coming from the Engine Control Unit like analog/digital inputs, pre-defined math channels and optionally, the GPS08 Module.

MXS 1.2 Strada is available in two versions:

Watch Your Data in Pre-Configured Pages

View data such as RPM, water temperature, oil pressure, and much more through our custom pre-configured pages.

High Contrast TFT Display

The Aim MXS 1.2 Strada shows with RPM scale, all the data you need, like speed, water temperature and oil pressure, lap times and much more. You can choose the custom pages you wish, including up to four additional fields

A wide library of page styles, defining which data to be shown, their end of scale and measured units. Swapping between pages is quite easy with the Aim MXS Strada using the push buttons provided.

Flexible Shift Lights and Alarms

The shift lights can be set to change colours for each gear when needed, while the alarms can be set to display certain colours in certain events. There is a total of 10 shift lights, and 6 alarm lights. Both are high intensity, colour changing RGB LED’s.

CAN Output

With the CAN Output you can send messages directly to an existing CAN network in order to improve the range of vehicle control possibilities.

Two Digital Outputs

The MXS 1.2 Strada features tow digital outputs that can be automatically activated depending on the analog or digital inputs from the ECU. For examples, they can be used to turn on or off a fan or additional lights when a certain event is triggered.

MXS Strada Connection Examples

Race Studio 3

RaceStudio 3 can be downloaded free of charge and is a great platform to see and analyse all your data from the ECU and the various channels. The data is then displayed in graphs, histograms and tables, making is easy to track and make changes.

Configuration

With Race Studio 3 you can create, modify, delete, import and export configurations with all channels, ECU drivers, Math channels, Display Pages, Digital outputs, Alarms, Shift Lights and all the expansions you need. You will also be able to manage the map of all your racing tracks and compare two laps watching the video recorded by SmartyCam HD cameras.

Analysis

With Race Studio 3 you can also analyse all data recorded by MXG and downloaded to your PC: graphs, histograms and tables will help you study your performance, providing an objective support to avoid mistakes and improve performances.

A Wide Range of data sources

MXG is the dashlogger designed to acquire and display data coming from your ECU, the internal accelerometer and gyro, as well as from the GPS08 Module included in the kit, analog/digital inputs and predefined math channels. Performance and data acquired can also be incremented adding up to eight expansion modules. Its 7″ display makes it perfect for wide cockpits installation.

MXS 1.2 Strada Standard With OBD11 Loom. Part. XA3MXSST12A020
MXS 1.2 Strada Standard With CAN ECU Loom. Part.XA3MXSST12A010

In The Box

• MXS 1.2 Strada
• USB cable
• 14 pin standard wiring
• 23 pin connector + contacts
• Software installation CD

Technical Specs

MXS Strada Technical Specifications

Display: 5" TFT
Resolution: 800x480 pixels
Contrast: 600:1
Brightness: 700cd/m2 - 1,100 Lumen
Ambient light sensor: Yes
Alarm LEDs: 6 RGB freely configurable
Shift light: 10 integrated freely configurable RGB LEDs
CAN connections: 2
ECU connections: CAN, RS232 or K-Line
ECU compatibility: + 1,000 industry leading ECUs
Expansion CAN connection: GPS, Channel Expansion, TC Hub, Lambda Controller, SmartyCam HD
Analog inputs: 4 fully configurable, max 1,000 Hz each
Digital inputs: 1 speed input, lap signal, coil RPM input
Digital outputs: 1 (1 Amp max)
Second CAN: Yes
Body: Anodized Aluminum
Pushbuttons: Metallic
Connectors: 2 AMP connectors
Dimensions: 169.4x97x23 mm
Weight: 480 g
Power consumption: 400 mA
Waterproof: IP65

Accessories

22 pins harness Part number: V02573020 
Download the tech sheet 

22 pins harness with 1 thermocouple Part number: V02573080 
Download the tech sheet 

22 pins harness with 2 thermocouples Part number: V02573160
Download the tech sheet 

37 pins harness with 2 thermocouples Part number: V02573050
Download the tech sheet 

37 pins harness with 2 thermocouples Part number: V02573050
Download the tech sheet

Remote buttons interface More info

22 pins female Deutsch connector Part number: 5CN822F0

37 pins female Deutsch connector Part number: 5CN837F00

Spare Parts

37 pins harness Part number: V02573010
Download the tech sheet

GPS08 Module

USB adapter Part number: V02573030
Download the tech sheet

USB cable Part number: X90TMPC002

Reversing Camera

The Video In connector allows the connection of two different analog cameras, that may be activated as here down described.

This camera offers a couple of interesting options,

• The possibility to reverse the image
• The possibility to enable or disable the parking overlay view

read more

Downloads

User guide

Technical sheet

Product history

Digital outputs

Standard harness

Installation template (scaled 1:1)

Rear camera technical sheet

Pictures

The 5" Aim MXS 1.2  data logger display acquires and displays data from your engine ECU, the internal accelerometer and the GPS08 Module included in the kit.

The MXS also reads  analog/digital inputs and predefined math channels and  the performance data acquired can also be incremented adding up to eight expansion modules. Its 5" display has been specifically designed for small cockpits installation. The internal accelerometer and gyro, just to name a few. Performance and data acquired can also be incremented adding up to eight expansion modules. Its 5″ display has been specifically designed for installation in small cockpits.

The MXS 1.2 is also available in its STRADA Display version -  A dash display for road use which is also available as an IVA approved kit. Find out more...

CAN Output

With the CAN Output you can send messages directly to an existing CAN network in order to improve the range of vehicle control possibilities.

Configurable Pages

The vibrant TFT display of the MXS 1.2 does not only look great, but it can also display various information for its extensive library of maps. You can easily view different data via its 2 dedicated hard buttons. Additionally, if you don’t like the preloaded maps, you can always create a custom one.

The Road Legal - MOT Approved, MXG IVA Compliant 7" Plug and Play Dash Kit, is a complete Road-Legal Display Solution for OEM, Kit Car Builders and Race Car Builders.

The kit has pre-configured, simple wiring connections, for all the relevant electrical items of your vehicle such as Indicators, Lights, Fuel Gauge, Hazard Lights, Handbrake Warning etc

Perfect Dash & Wiring Kit for any Car!

The key to the system, is the specially designed wiring loom included in the kit, that makes it a ‘Plug & Play’ easy installation of your vehicle electrics. This is all connected to your vehicle’s Engine ECU, to allow easily configurable warning lights and gauges as well as Speed / Gears Revs etc.


The Kit Includes:

• Road Legal IVA Compliant 5” TFT Colour Display Dash
• ECU Connection Lead
• Simple Connection Harness
• Wheel Speed Sensor, 
• All Software needed

Easy Fit?

Once the dash is mounted in the vehicle, any qualified auto electrician will be able connect it all within a day, making the IVA Approved Kit Car Dash Kit, a complete solution for kit car and road car Builders, who need a fully IVA compliant Dash Display for their build. With a pre-configured wiring loom, this offers a simple and cost effective legal way, to get a new digital display in your car.

No ECU?

No Problem, we can take a RPM feed from any Coil or Tacho Signal to make it all come alive.

Aim MXS Strada Plug and Play TFT Dash Display

The IVA Approved, 5″ colour ‘Plug and Play’ Car Dash Display, is used on kit cars all over the world. With its clever ECU link, it acquires data from your vehicle engine, making it relatively easy to fit. 

High Contrast TFT Display

Aim MXG Strada 1.2 features a high contrast TFT display: its visual quality is always optimal as its ambient light sensor keeps the back light at the best brightness levels. The dash is of course available also in the “Street Icons” version (fuel, oil, water temp etc.)

Watch Your Data in Pre-Configured Pages

The MXG IVA Compliant 7" Plug and Play Dash Kit has a high contrast TFT display and its visual quality is always optimal, as its ambient light sensor keeps the back light at the best brightness levels. The dash is available in the “Street Icons” version needed by street users (fuel, oil, water temp etc.)

Flexible alarms & Custom Street Icons

MXG IVA Compliant 7" Plug and Play Dash Kit features five configurable RGB alarm LED's. You choose the conditions, you choose the colours.  Select a solid alarm or flashing one - and the flashing frequency, choose to have an accompanying text message, and set the alarm priorities. Select then the street icons you need among the wide list you will find in “Race Studio 3 – Icons Management” and set them up the way you prefer or according with your needs. Any of them is fully configurable and if this shouldn’t be enough, you will be able to upload and set up your own customised icons.

Camera inputs, also for mirror camera

Two analogue camera inputs are available, to swap your display into a mirror camera, through push button command or event management.

Race Studio 3

MXG IVA Compliant 7" Plug and Play Dash Kit is configured via Race Studio 3: you can create, modify, delete, import and export configurations with all channels, ECU drivers, Math channels, Display Pages, Digital output, Alarms, Shift Lights and all the expansions you need.

In The Box

• Road Legal MXG  IVA Compliant 7” TFT Colour Display Dash
• ECU Conection Lead
• Simple Connection Harness
• Wheel Speed Sensor, 
• all Software needed

Technical Specs

Technical Specifications

Display: 7” TFT
Resolution: 800×480 pixels
Contrast: 1000:1
Brightness: 700cd/m2 – 1,100 Lumen
Ambient light sensor: Yes
Alarm LED's: 8 configurable RGB LED's
Shift lights: 10 configurable RGB LED's
CAN connections: 2
ECU connections: CAN, RS232 or K-Line
ECU compatibility: + 1,000 industry leading ECU's
Expansion CAN connection: GPS, Channel Expansion, TC Hub, Lambda Controller, SmartyCam HD
Analogue inputs: 8 fully configurable, max 1,000 Hz each
Digital inputs: 1 speed input, coil RPM input
Digital outputs: 1 (1 A max)
Second CAN: Yes
Body: Anodized Aluminium
Pushbuttons: Metallic
Connectors: 2 AMP connectors + 1 Binder connector
Power consumption: 400 mA
Dimensions: 237×127.6×26 mm
Weight: 950 g
Waterproof: IP65

Fitting

Expandable According To Your Needs

As we have a long Motorsport heritage, the MXG Strada Dash can also be connected to other Aim products such as our Data Loggers or Cameras.

Aim systems also feature digital inputs:

• Speed signals – From the ECU, from the GPS and from the wheel sensors.
• RPM – From the ECU or from a digital input connected to a square wave signal (8 to 50 V) or to a low voltage (from 150 to 400 V) of the coil.
• Lap signal – Lap and split times are sampled by the GPS or via optical receiver/transmitter

Accessories

Remote buttons interface More info

GPS08 Module

USB adapter Part number: V02573030
Download the tech sheet

USB cable Part number: X90TMPC002

Downloads

The Road Legal - MOT Approved, IVA Compliant MXP IVA Compliant 6" Dash Display Kit, is a complete Road-Legal Display Solution for OEM, Kit Car Builders and Race Car Builders.

The kit has pre-configured, simple wiring connections, for all the relevant electrical items of your vehicle such as Indicators, Lights, Fuel Gauge, Hazard Lights, Handbrake Warning etc

Perfect Dash & Wiring Kit for any Car!

The key to the system, is the specially designed wiring loom included in the kit, that makes it a ‘Plug & Play’ easy installation of your vehicle electrics. This is all connected to your vehicle’s Engine ECU, to allow easily configurable warning lights and gauges as well as Speed / Gears Revs etc.


The Kit Includes:

• Road Legal IVA Compliant 6” TFT Colour Display Dash
• ECU Connection Lead
• Simple Connection Harness
• Wheel Speed Sensor, 
• All Software needed

Easy Fit?

Once the dash is mounted in the vehicle, any qualified auto electrician will be able connect it all within a day, making the IVA Approved Kit Car Dash Kit, a complete solution for kit car and road car Builders, who need a fully IVA compliant Dash Display for their build. With a pre-configured wiring loom, this offers a simple and cost effective legal way, to get a new digital display in your car.

No ECU?

No Problem, we can take a RPM feed from any Coil or Tacho Signal to make it all come alive.

Aim MXP Strada Plug and Play TFT Dash Display

The MXP IVA Approved, 6″ colour ‘Plug and Play’ Car Dash Display, is used on kit cars all over the world. With its clever ECU link, it acquires data from your vehicle engine, making it relatively easy to fit.

Freely configurable pages

High Contrast TFT Display

Aim MXP features a high contrast TFT display: its visual quality is always optimal as its ambient light sensor keeps the back light at the best brightness levels. The dash is of course available also in the “Street Icons” version (fuel, oil, water temp etc.)

Watch Your Data in Pre-Configured Pages

The MXP IVA Compliant 6" Dash Display Kit has a high contrast TFT display and its visual quality is always optimal, as its ambient light sensor keeps the back-light at the best brightness levels. The dash is available in the “Street Icons” version needed by street users (fuel, oil, water temp etc.)

Flexible alarms & custom street icons

MXP features five configurable RGB alarm LED's. You choose the conditions, you choose the colours.  Select a solid alarm or flashing one - and the flashing frequency, choose to have an accompanying text message, and set the alarm priorities. Select then the street icons you need among the wide list you will find in “Race Studio 3 – Icons Management” and set them up the way you prefer or according with your needs. Any of them is fully configurable and if this shouldn’t be enough, you will be able to upload and set up your own customised icons.

Camera inputs, also for mirror camera

Two analog camera inputs are available, to swap your display into a mirror camera, through push button command or event management.

Race Studio 3

MXP 1.2 Strada is to be configured via Race Studio 3: you can create, modify, delete, import and export configurations with all channels, ECU drivers, Math channels, Display Pages, Digital output, Alarms, Shift Lights and all the expansions you need.

In The Box

• Road Legal MXP IVA Compliant 6” TFT Colour Display Dash
• ECU Connection Lead
• Simple Connection Harness
• Wheel Speed Sensor, 
• All Software needed

Technical Specs

Display: 6” TFT
Resolution: 800x480 pixels
Contrast: 600:1
Brightness: 700cd/m2 - 1,100 Lumen
Ambient light sensor: Yes
Alarm display icons: Yes, freely configurable
Shift lights: 10 integrated freely configurable RGB LEDs
Alarm LED: 5 integrated freely configurable RGB LEDs
CAN connections: 3
ECU connection: CAN, RS232 or K-Line
ECU compatibility: 1,000+ industry leading ECUs
Expansion CAN connection: GPS Module, Channel Expansion, Thermocouples expansions,Lambda Controller, SmartyCam HD
Analog inputs: 8 fully configurable, max 1,000 Hz each
Digital inputs: 1 Speed input, coil RPM input
Digital outputs: 1 (1 A max)
Second CAN: Yes
Body: Anodized Aluminum
Pushbuttons: Metallic
Connectors: 2 AMP connectors
Power consumption: 400 mA
Dimensions: 189.6 x 106.4 x 24.9 mm
Weight: 640 g
Waterproof: IP65

XA5MXPSTRA010 – MXP Strada with CAN harness (ECU)
XA5MXPSTRA020 – MXP Strada with OBD harness CAN+K (ECU)
XA5MXPSTRI010 –  MXP Strada Street icons version with CAN harness (ECU)
XA5MXPSTRI020 –  MXP Strada Street icons version with OBD harness CAN+K (ECU)

Fitting

Expandable According To Your Needs

As we have a long Motorsport heritage, the MXP Strada Dash can also be connected to other Aim products such as our Data Loggers or Cameras.

Aim systems also feature digital inputs:

• Speed signals – From the ECU, from the GPS and from the wheel sensors.
• RPM – From the ECU or from a digital input connected to a square wave signal (8 to 50 V) or to a low voltage (from 150 to 400 V) of the coil.
• Lap signal – Lap and split times are sampled by the GPS or via optical receiver/transmitter

Accessories

Remote buttons interface More info

GPS08 Module

USB adapter Part number: V02573030
Download the tech sheet

USB cable Part number: X90TMPC002

Downloads

The Road Legal - MOT Approved, IVA Compliant Digital Dash Display, is a complete Road-Legal Display Solution for OEM, Kit Car Builders and Race Car Builders.

The kit has pre-configured, simple wiring connections, for all the relevant electrical items of your vehicle such as Indicators, Lights, Fuel Gauge, Hazard Lights, Handbrake Warning etc

Perfect Dash & Wiring Kit for any Car!

Easy Fit?

Once the dash is mounted in the vehicle, any qualified auto electrician will be able connect it all within a day, making the IVA Approved Kit Car Dash Kit, a complete solution for kit car and road car Builders, who need a fully IVA compliant Dash Display for their build. With a pre-configured wiring loom, this offers a simple and cost effective legal way, to get a new digital display in your car.

No ECU?

No Problem, we can take a RPM feed from any Coil or Tacho Signal to make it all come alive.

Aim MXS Strada Plug and Play TFT Dash Display

The IVA Approved, 5″ colour ‘Plug and Play’ Car Dash Display, is used on kit cars all over the world. With its clever ECU link, it acquires data from your vehicle engine, making it relatively easy to fit. 

High Contrast TFT Display

The Aim MXS 1.2 Strada shows with RPM scale, all the data you need, like speed, water temperature and oil pressure, lap times and much more. You can choose the custom pages you wish, including up to four additional fields. A wide library of page styles, defining which data to be shown, their end of scale and measured units. Swapping between pages is quite easy with the Aim MXS Strada using the push buttons provided.

Watch Your Data in Pre-Configured Pages

The MXS 1.2 Strada has a high contrast TFT display and its visual quality is always optimal, as its ambient light sensor keeps the backlight at the best brightness levels. The dash is available in the “Street Icons” version needed by street users (fuel, oil, water temp etc.)

Flexible Shift Lights and Alarms

The ten multi-coloured RGB shift lights on the MXS Strada can be customised to your liking to define the RPM threshold for each single gear. The same flexibility applies to the configurable RGB alarm LED's. You can configure them in order to turn them on/off depending on analogue or digital inputs, ECU values, expansion values, math channels or, optionally, GPS information. You choose conditions and colours and you can select a solid alarm or flashing one and the flashing frequency. It is also possible to configure an accompanying text message along with the alarm priorities.

Race Studio 3

MXS 1.2 Strada is to be configured via Race Studio3: you can create, modify, delete, import and export configurations with all channels, ECU drivers, Math channels, Display Pages, Digital output, Alarms, Shift Lights and all the expansions you need.

In The Box

• Road Legal IVA Compliant 5” TFT Colour Display Dash
• ECU Conection Lead
• Simple Connection Harness
• Wheel Speed Sensor, 
• all Software needed

Technical Specs

MXS Strada Technical Specifications

Display : 5” TFT
Resolution : 800×480 pixels
Contrast : 600:1
Brightness : 700cd/m2 – 1,100 Lumen
Ambient light sensor : Yes
Alarm LEDs : 6 RGB freely configurable
Shift lights : 10 integrated freely configurable RGB LED's
CAN connections : 2
ECU connections : CAN, RS232 or K-Line
ECU compatibility : + 1,000 industry leading ECU's
Expansion CAN connection : GPS, Channel Expansion, TC Hub, Lambda Controller, SmartyCam HD
Analog inputs : 8 fully configurable, max 1,000 Hz each
Digital inputs : 1 speed input, coil RPM input
Digital outputs : 1 (1 A max)
Second CAN : Yes
Body : Anodized Aluminium
Pushbuttons : Metallic
Connectors : 2 AMP connectors
Power consumption : 400 mA
Dimensions : 169.4x97x23 mm
Weight : 480 g
Waterproof : IP65

Fitting

Expandable According To Your Needs

As we have a long Motorsport heritage, the MXS Strada Dash can also be connected to other Aim products such as our Data Loggers or Cameras.

Aim systems also feature digital inputs:

• Speed signals – From the ECU, from the GPS and from the wheel sensors.
• RPM – From the ECU or from a digital input connected to a square wave signal (8 to 50 V) or to a low voltage (from 150 to 400 V) of the coil.
• Lap signal – Lap and split times are sampled by the GPS or via optical receiver/transmitter

Accessories

Remote buttons interface More info

GPS08 Module

USB adapter Part number: V02573030
Download the tech sheet

USB cable Part number: X90TMPC002

Downloads

RearMaster Reversing/Rear View Mirror Camera to fit all Aim MX Displays and Data Loggers. Extremely useful for road car builds and race car Pit reversing.

Physical Connection

The Aim loggers built to manage rear cameras are provided with a female metallic 5 pins Binder connector, placed on the device bottom and labelled as “VIDEO IN” (following image).

The Video In connector allows the connection of two different analogue cameras, that may be activated as here down described.

• This camera offers a couple of interesting options:he possibility to reverse the image
• The possibility to enable or disable the parking overlay view

Please Note: some analogue cameras require a 3.3V power. Please, verify before you connect yours to the +Vb output (12V), supplied by the pin3 of the Binder connector .

It has, as most of the analogue cameras, a connection through standard RCA connectors (following right image), for which we have developed the patch cables:

Single RearMaster camera (cable length: 5m) ended with:

• Male metallic 5 pins Binder connector for connection to Aim loggers
• DC Power Connector (yellow) to be connected to the camera one;
• Video RCA Connector (red) to be connected to the camera one.

Double RearMaster camera (cable length: 6m) ended with

• Male metallic 5 pins Binder connector for connection to AiM loggers
• X2 DC Power Connector (yellow)* to be connected to the camera one
• X2 Video RCA Connector (red)* to be connected to the camera one.

* The two DC Power and Video RCA cables couples are respectively 4m and 6m long, in order to allow both front camera and rear camera connection

Aim offers the same camera with a more reliable Binder connection (Part no. XB1ZCAMHD00; Binder conector pinouts are specified below):

The patch cables available are:

• Male metallic 5 pins Binder connector for connection to AiM loggers
• Female metallic 5 pins Binder connector for Mirror Camera connection.

Double Aim Mirror Camera: ended with:

• Male metallic 5 pins Binder connector for connection to AiM loggers
• X2 female metallic Binder connectors: each one must be used to connect the Mirror Camera (cable lengths 4m – front camera – and 6m – rear camera).

Configuration through Race Studio 3

Once the connection has been executed, it is necessary to configure the device, defining a specific event that causes the camera image displaying. For example, if you wish to turn ON the camera when you insert the Reverse Gear, these are the steps to follow:

• Open Race Studio 3, connect your system via Wi-Fi or USB and create a new configuration (or modify an existing one).
• The Gear, of course, is supposed to be one of the available channels. It is possible to obtain it

Through the analogue sensor, plugging it into one of the device analogue channels, which must be configured as expressed on the right (Channels tab). The “Use reverse gear” box must be ticked.

Through ECU, selecting the compatible protocol with your vehicle ECU from the ECU Stream tab.

Open the Trigger Commands tab and click “Add New Command”: select “First Camera Input Page” as a command to activate when the Gear is equal to “R”.

Settings through Aim device menu

The camera parameters setting must be executed from the device menu directly, as explained below:

• Press “MENU/<<” button.
• Pressing “PREV and “NEXT”, move on the VIDEO IN icon and press “ENTER”.
• The system offers the possibility to set the image format (PAL or NTSC – according to the camera technical specs), brightness and contrast for each available input.

If no key is pressed, after 5 seconds the menu disappears, showing the camera image in live streaming, so that it can be better positioned.

Downloads

Information Sheet

The Strada Kit Turns any MX Strada into a full-working data logger. Kit contains an Aim Strada Logger, Data Hub and a GPS 08 Module.

Turn any MX Strada into a full-working logger. Comprising of the Aim Strada Logger, the Data Hub and the GPS 08 Module, the kit will turn any MX Strada into a full-working data logger able to collect data ready to be analysed on Race Studio 3 helping you improve to your driver performance and identifying possible improvements in vehicle setup

Aim MX Strada Kit

Turn any MX Strada into a full-working logger

Receiving and reading data while you are driving is not enough anymore?

Then it’s time to step up your game, …with the brand new Aim Strada Kit!

Comprising of the Aim Strada Logger, the Data Hub and the GPS 08 Module, the kit will turn any MX Strada into a full-working data logger able to collect data ready to be analysed on Race Studio 3 helping you improve to your driver performance and identifying possible improvements in vehicle setup. Reliable and easy to install, the Strada Kit is just what you need to make the difference between an above average fast driver into a race winner!

Strada Logger is a small SD Card holder that can be connected via CAN bus to these loggers

Its management is really simple: just connect Strada Logger to your AiM device and data will be saved on the SD card* as well as stored in the logger memory.

No configuration is needed.

In The Box

• Strada Logger,
• Four ways Data Hub,
• GPS08 Module.
• 4 GB Memory Card

MXS Strada Kit Technical Specs

MX STRADA KIT

Max power consumption: 50 mA
Cable length: 40 cm
SD Card: It supports up to 32 GB
Dimensions: 55.5×78.3×18 mm
Weight: 103 g
Waterproof: IP65

FOUR WAYS DATA HUB

Dimensions: 123x30x23.5 mm
CAN cable length: 40/150 cm
Weight: 97 g
Waterproof: IP65 GPS08
MODULE Dimensions: 64.8×53.2×19.7 mm
Weight: 60.5 g

GPS08 MODULE

Dimensions: 64.8×53.2×19.7 mm
Weight: 60.5 g

Downloads

Strada Logger Application note

Pictures