Timing, Dash & Data

The Aim Solo 2, 4" GPS Lap Timer, offers Precise timing, speed and identifies its GPS position from over 2,000 tracks all over the world.

Packed with race-winning technology, the Solo 2 is the most widely used lap timer and data logger currently on the market.

With features such as real-time GPS speed, lap timing and predictive lap times, the Solo 2 is sure to get more trophies into your cabinet.

Display Parameters

 There can be up to four live parameters simultaneously displayed on the screen at one time, such as vehicle GPS speed and lap number, rolling time, predictive time, and delta time.

 

LED light Indicators

The fully configurable LED’s can be set to indicate if you are faster or slower on a lap/split-lap

 

Seven Display Colours

Whether you want to wake up your Fast and Furious fantasies, or there is a genuine need for a different display colour, there is a unique colour for you.

 

Different Lap Modes

The Solo 2 comes with two different modes. “Speed mode” is designed for circuit racing, and “Performance mode” is designed for A-B racing such as: hill climbs, drag racing, etc.

 

Pre-Loaded Track Database

With over 3000 tracks in its database, the Solo 2 is bound to have your track on there. Don’t worry if your track is not in the system. The unit will automatically learn the track via GPS after a few laps. That way, next time you’re out, you can see your previous lap times.

 

 

Advanced GPS Technology

The Solo 2 gets its GPS coordinated from 2 different satellites, giving you accuracy down to two-hundredths of a second.

 

Simple data analysis and upload

                The data can be simply and wirelessly uploaded to your PC via a built-in secured Wi-Fi connection for extended analysis.

 

RaceStudio 3

                RaceStudio 3 is provided as a free download when you purchase the Solo 2. This is a great platform to modify and view all the data from the unit. It’s so intuitive amateurs, pro drivers, coaches and engineers use it regularly due to its advanced features.

 

 

Optional accessories

The Caterham Kit is similar to the Video VBOX Lite Kit but includes roll cage mounts and a Caterham specific power supply. 

Video VBOX Lite is a one box solution, incorporating a solid state video recorder, a VBOX 10Hz GPS data-logger and a real time graphic overlay. This combination allows users to carry out detailed driver training and vehicle analysis without the expense and specialised knowledge involved in professional level data-loggers.

Based on the high end Video VBOX,  Video VBOX Lite is a more affordable version of what Video VBOX users have called the ultimate track video system. Housed in a rugged plastic box, with a smaller footprint than the VideoVBOX Pro, Video VBOX Lite shares many of the same features as the top of the range product.

Contents:

• Video VBOX Lite 10Hz GPS data logger and video recorder, incorporating graphical overlay engine and the ability to log 4 CAN parameters
  (CAN interface cable purchased separately)
• 1 x 580L Sony HQ1 CCD bullet camera
• 1 x 420L Sony 1/3in CCD bullet camera
• 2 x Camera ring clamp mount 
• 2 x Camera Roll cage mount
• 2 x mono microphones
• Microphone splitter cable
• Magnetic GPS antenna
• Caterham specific power cable
• 8 GB SD card (Manual and software included on supplied SD card)

Optional:

• OLED Display with Predictive Lap Timing

The Track  Kit is similar to the Video VBOX Lite Kit but includes roll cage mounts instead of the normal camera mounts.  

Video VBOX Lite is a one box solution, incorporating a solid state video recorder, a VBOX 10Hz GPS data-logger and a real time graphic overlay. This combination allows users to carry out detailed driver training and vehicle analysis without the expense and specialised knowledge involved in professional level data-loggers.

Based on the high end Video VBOX,  Video VBOX Lite is a more affordable version of what Video VBOX users have called the ultimate track video system. Housed in a rugged plastic box, with a smaller footprint than the Video VBOX Pro, Video VBOX Lite shares many of the same features as the top of the range product.

Contents:

• Video VBOX Lite 10Hz GPS data logger and video recorder, incorporating graphical overlay engine and 4 CAN channel logging
• 1 x 580L Sony HQ1 CCD bullet camera
• 1 x 420L Sony 1/3in CCD bullet camera
• 2 x Camera ring clamp mount
• 2 x Camera roll cage mount (for picture-in-picture)
• 2 x mono microphones
• Microphone splitter cable
• Magnetic GPS antenna
• Unterminated Power cable
• 8 GB SD card, containing manual and software
• Unterminated power supply

LiveU Solo HDMI is a professional-grade wireless video encoder offering one-touch streaming to popular social media networks and online channels. This allows users to send the same video with graphical overlay generated in real-time by the VBOX Video HD2 to platforms such as YouTube, Facebook, Periscope and more, LIVE!

1080p camera featuring a Lemo connector, for use with the VBOX Video HD2 only.

The standard cable length is 3 m, a 6 m option is available.

The MultiChron, Hand-Held Digital Lap Timer / Stopwatch, tracks up to four different racers simultaneously. Light, Handy and versatile it is suited for any racing situation.

Aim MultiChron - Hand Held Digital Car Lap Timer Stopwatch

Its generous memory lets you record 99 laps per driver with up to 9 splits per competitor per lap. Moreover you can quickly see best laps and scroll all competitors’ lap times to review the race.

Black, lightweight (100 g batteries included) despite its rugged, appealing case, equipped with a bright display, the MultiChron is the ideal tool for any kind of competition.

Special Start Modes

MultiChron stopwatch features 2 different starting modes to match a variety of racing situations:

• “One Start” mode allows you to activate the start for all competitors pressing one only button: for races where all competitors start at the same time.
• “Multi Start” mode allows you to activate the start for each competitor independently: for races where competitors start at different times.

Innovative programming allows you to get accurate times even when your racers are close together at the lap marker: selecting 'Multi Key' you can attribute times to each racer pressing 1,2,3 or 4 button. Selecting 'One Key' you get all 4 times pressing the same key and then you attribute times to each racer. It's a quite useful mode in case of final rush.

 Technical Specifications

Dimensions:  25,5 x 29 mm
Weight:  100 g, batteries included

• 1/100 second precision
• Up to 99 lap times with up to 9 splits per lap
• Up to four competitors with single or multiple start
• Data recall while saving
• Automatic turn-off after 30 minutes inactivity
• Two 3V batteries allow you to keep your data safe

 

Downloads

User manual ver. 1.00

Pictures

The Aim CAN Connection, 300mm Remote Hub Single Port, works as an interface between all Aim data loggers and their peripheral sensors via CAN connection.    

Aim Technologies are committed to supplying professional engineers quality Motorsport products. The cables and accessories are well-engineered and designed for rigours of Motorsport.

 

The Aim MXL, USB Download Lead to 3.5mm Jack Plug, is a data download cable designed for downloading track-side data from Aim data logger systems.        

Aim Technologies are committed to supplying professional engineers quality Motorsport products. Our cables and accessories are well-engineered and designed for rigours of Motorsport. Aim Technologies racing components are amongst the best in the industry today.

The Aim Car ECU Bridge CAN RS232 Connection is available in two variants, the OBDII connector for immediate plug & play connection to the OBDII port of cars with stock ECU's or CAN/RS232 connection for direct installation on aftermarket ECU's. 

They are compatible with Aim MXL Dash, Aim G-Dash and Aim Formula steering wheels, and of course with the Aim SmartyCam HD and Aim SmartyCam GP HD racing cameras.

The easiest way to show engine data on visors and SmartyCam videos

ECU Bridge

ECU Bridge and RPM Bridge are two systems that are needed whenever engine data needs to be viewed  on a display or on a SmartyCam video (if no recording is require.

They are compatible with MXL Dash, G-Dash and Formula/GT steering wheels, and of course with the SmartyCam and SmartyCamGP.

ECU Bridge is to be used in when the Engine Control Unit transmits data by either OBDII, CAN or RS232.

Aim have developed hundreds of different protocols to make compatibility with virtually all ECU's possible, either stock and after market ECU's. ECU Bridge has to be properly configured with Race Studio 2 software to communicate with the different visors/cameras on one side and ECU's on the other side.

ECU Bridge Connection Example

RPM Bridge Connection Example

ECU with Aim Products

  

CAN/RS232 connection

ECU Bridge is available in two variants:

• With OBDII connector, for immediate plug&play connection to the OBDII port of cars with stock ECU's
• With CAN/RS232 connection, for direct installation on aftermarket ECU's.

 

RPM Bridge

RPM Bridge is to be used whenever the car has got no ECU (i.e. classic cars).
In this case RPM data can be obtained with connection to the coil or reading a square wave signal generated by the ignition system

 

Technical Specification

ECU Bridge technical characteristics

• Configurable ECU interface
• CAN protocol for external modules (visors or SmartyCam HD)
• USB port for PC communication
• External power 8/18 V

RPM Bridge technical characteristics

• Coil signal 150-400 V
• Square wave signal 4-50 V
• CAN protocol for external modules (visors or SmartyCam HD)
• USB port for PC communication
• External power 8/18 V

In The Box

ECU Bridge

• ECU Bridge with connection cable (CAN/RS232 or CAN/K Line)
• USB cable

RPM Bridge

• RPM Bridge with connection cable (loose wires)
• USB cable

 

Product code: X90BRIDGE01

The Aim Ecu Bridge With CAN/K-line Communication Cable & Standard OBDII Standard Connector  is available in two variants, the OBDII connector for immediate plug & play connection to the OBDII port of cars with stock ECUs or CAN/RS232 connection for direct installation on aftermarket ECUs. 

They are compatible with Aim MXL Dash, Aim G-Dash and AimFormula steering wheels, and of course with the Aim SmartyCam HD and Aim SmartyCam GP HD racing cameras.

The easiest way to show engine data on visors and SmartyCam videos

ECU Bridge

ECU Bridge and RPM Bridge are two systems that are needed whenever engine data needs to be viewed  on a display or on a SmartyCam video (if no recording is require.

They are compatible with MXL Dash, G-Dash and Formula/GT steering wheels, and of course with the SmartyCam and SmartyCamGP.

ECU Bridge is to be used in when the Engine Control Unit transmits data by either OBDII, CAN or RS232.

Aim have developed hundreds of different protocols to make compatibility with virtually all ECUs possible, either stock and after market ECUs. ECU Bridge has to be properly configured with Race Studio 2 software to communicate with the different visors/cameras on one side and ECUs on the other side.

ECU Bridge Connection Example

RPM Bridge Connection Example

ECU with Aim Products

  

CAN/RS232 connection

ECU Bridge is available in two variants:

• With OBDII connector, for immediate plug&play connection to the OBDII port of cars with stock ECUs
• With CAN/RS232 connection, for direct installation on aftermarket ECUs.

 

RPM Bridge

RPM Bridge is to be used whenever the car has got no ECU (i.e. classic cars).
In this case RPM data can be obtained with connection to the coil or reading a square wave signal generated by the ignition system

 

Technical Specification

ECU Bridge technical characteristics

• Configurable ECU interface
• CAN protocol for external modules (visors or SmartyCam HD)
• USB port for PC communication
• External power 8/18 V

RPM Bridge technical characteristics

• Coil signal 150-400 V
• Square wave signal 4-50 V
• CAN protocol for external modules (visors or SmartyCam HD)
• USB port for PC communication
• External power 8/18 V

In The Box

ECU Bridge

• ECU Bridge with connection cable (CAN/RS232 or CAN/K Line)
• USB cable

RPM Bridge

• RPM Bridge with connection cable (loose wires)
• USB cable

ECU

Stock and Racing ECU's

You can find a list of ECU's on our support site here

 

 

Downloads

 

ECU Bridge user manual ver. 1.09

RPM Bridge user manual ver. 1.03

RPM Bridge pinout ver. 1.01

USB cable for data download for SMC Bridge

Gear calculation procedure ver. 1.09

Pictures

 

The Aim ECU Bridge for Porsche 996-997 GT3 CUP is available in two variants, the OBDII connector for immediate plug & play connection to the OBDII port of cars with stock ECUs or CAN/RS232 connection for direct installation on aftermarket ECU's. 

They are compatible with Aim MXL Dash, Aim G-Dash and Aim Formula steering wheels, and of course with the Aim SmartyCam HD and Aim SmartyCam GP HD racing cameras.

The easiest way to show engine data on visors and SmartyCam videos

ECU Bridge

ECU Bridge and RPM Bridge are two systems that are needed whenever engine data needs to be viewed  on a display or on a SmartyCam video (if no recording is require.

They are compatible with MXL Dash, G-Dash and Formula/GT steering wheels, and of course with the SmartyCam and SmartyCamGP.

ECU Bridge is to be used in when the Engine Control Unit transmits data by either OBDII, CAN or RS232.

Aim have developed hundreds of different protocols to make compatibility with virtually all ECU's possible, either stock and after market ECU's. ECU Bridge has to be properly configured with Race Studio 2 software to communicate with the different visors/cameras on one side and ECU's on the other side.

ECU Bridge Connection Example

RPM Bridge Connection Example

ECU with Aim Products

  

CAN/RS232 connection

ECU Bridge is available in two variants:

• With OBDII connector, for immediate plug&play connection to the OBDII port of cars with stock ECU's
• With CAN/RS232 connection, for direct installation on aftermarket ECU's.

 

RPM Bridge

RPM Bridge is to be used whenever the car has got no ECU (i.e. classic cars).
In this case RPM data can be obtained with connection to the coil or reading a square wave signal generated by the ignition system

 

Technical Specification

ECU Bridge technical characteristics

• Configurable ECU interface
• CAN protocol for external modules (visors or SmartyCam HD)
• USB port for PC communication
• External power 8/18 V

RPM Bridge technical characteristics

• Coil signal 150-400 V
• Square wave signal 4-50 V
• CAN protocol for external modules (visors or SmartyCam HD)
• USB port for PC communication
• External power 8/18 V

In The Box

Aim ECU Bridge for Porsche 996-997 GT3 CUP

ECU Bridge

• ECU Bridge with connection cable (CAN/RS232 or CAN/K Line)
• USB cable

RPM Bridge

• RPM Bridge with connection cable (loose wires)
• USB cable

 

The Aim ECU Bridge for Ferrari F430 Challenger GT3 is the connector for immediate plug & play connection to the OBDII port of cars with stock ECU's or CAN/RS232 connection for direct installation on aftermarket ECU's. 

They are compatible with Aim MXL Dash, Aim G-Dash and Aim Formula steering wheels, and of course with the Aim SmartyCam HD and Aim SmartyCam GP HD racing cameras.

The easiest way to show engine data on visors and SmartyCam videos

ECU Bridge

ECU Bridge and RPM Bridge are two systems that are needed whenever engine data needs to be viewed on a display or on a SmartyCam video (if no recording is required)

They are compatible with MXL Dash, G-Dash and Formula/GT steering wheels, and of course with the SmartyCam and SmartyCamGP.

ECU Bridge is to be used in when the Engine Control Unit transmits data by either OBDII, CAN or RS232.

Aim have developed hundreds of different protocols to make compatibility with virtually all ECU's possible, either stock and after market ECU's. ECU Bridge has to be properly configured with Race Studio 2 software to communicate with the different visors/cameras on one side and ECU's on the other side.

ECU Bridge Connection Example

RPM Bridge Connection Example

ECU with Aim Products

  

CAN/RS232 connection

ECU Bridge is available in two variants:

• With OBDII connector, for immediate plug&play connection to the OBDII port of cars with stock ECU's
• With CAN/RS232 connection, for direct installation on aftermarket ECU's.

 

RPM Bridge

RPM Bridge is to be used whenever the car has got no ECU (i.e. classic cars).
In this case RPM data can be obtained with connection to the coil or reading a square wave signal generated by the ignition system

 

Technical Specification

ECU Bridge technical characteristics

• Configurable ECU interface
• CAN protocol for external modules (visors or SmartyCam HD)
• USB port for PC communication
• External power 8/18 V

RPM Bridge technical characteristics

• Coil signal 150-400 V
• Square wave signal 4-50 V
• CAN protocol for external modules (visors or SmartyCam HD)
• USB port for PC communication
• External power 8/18 V

 

 

The Aim LCU ONE CAN Lambda Controller range of products allow you to perfectly tune the carburetion of your engine, appreciably improving your car performances.    

All LCU-One lambda controllers use a wide band Bosch LSU 4.9 probe either for its capacity of saving the original calibration for its all life and for its duration: Bosch LSU 4.9 probe, in fact, has been designed to last for more than 100,000 km on a stock car.

Full Control of your engine

The LCU ONE CAN Lambda Controller can detect punctual Lambda value from 0.65 to 1.6, offering you an extremely precise measurement, very useful for engine tuning.

Through the analysis of the remaining oxygen, LCU-One points out possible oxygen excess/lack in the carburetion, providing an essential information for 4 strokes engines: configurability of Stoichiometric ratio allows LCU-One to be used on petrol powered engines as well as on diesel or on alternative fuel (bio fuel, ethanol) powered ones.

LCU ONE CAN Lambda Controller Connection Examples

Three variants for all your needs

Aim LCU ONE CAN Lambda Controller range is available in three different versions:

• LCU-One CAN: uses a CAN bus and is extremely easy to install.
• LCU-One Analogue: uses a serial line for programming and an analogue output proportional to lambda value. To be even more user-friendly, these two versions of LCU-One switch on/off together with the logger.

• LCU-One CAN + Analogue is equipped with both CAN bus and analogue output.

All the data you need at your fingertips

LCU-One CAN

• CAN connection

The product configures Stoichiometric point and provides:

• Lambda value and Air/Fuel ratio
• Lambda probe temperature and diagnosis

LCU-One Analog

The product provides Lambda value and Air/Fuel ratio and - thanks to the dedicated Lambda Configurator software, LCU-One Analogue allows to configure:

• Stoichiometric point
• Analogue output (0-5 Volt)

Technical Specs

LCU-One Lambda Controller technical specs

Dimensions: 80x37x15 mm
Waterproof: IP67

In The Box

 

The Aim Data Hub, 4x CAN connection multiplier, works as an interface between all Aim loggers and their peripheral sensors. Available in two cable lengths.            

The Data Hub 4x CAN Connection Multiplier, is used for the acquisition of all essential data you need to evaluate your car performance. It allows the connection of many peripherals to your data logger via one convenient cable. 

Each Hub connects the logger with four peripherals: i.e. LCU lambda controller, GPS08 Module and one or more TC Hub (thermocouple multiplier) and takes all the information you need to your logger, with only one cable, minimising overall cables. 

Data Hub is available in two versions:

Data Hub CAN connection multiplier 40 cm cable - X08HUB010
Data Hub CAN connection multiplier 150 cm cable - X08HUB150

Technical Specifications

Two way Data Hub

Dimensions: 70x30x23,5 mm
CAN cable length: 40 cm
Source cable length: 165 cm
Weight: 86 g
Waterproof: IP65

Four way Data Hub

Dimensions: 123x30x23,5 mm
CAN cable length: 40/150 cm
Weight: 97 g
Waterproof: IP65

The Aim TC Hub, Thermocouple Multiplier Type K, controls up to four additional thermocouples via CAN to your Aim logger, to manage critical engine temperatures.

Using TC Hub you can easily keep under control all your temperature sensors data, monitoring each single cylinder exhaust gas temperature, together with water, oil and head temperatures.

The Aim TC Hub - Thermocouple Multiplier is waterproof and robust thanks to its aluminium structure, TC Hub provides reliable data as its sampling frequency is configurable up to 50Hz per channel. Finally, with TC Hub your wiring overall is reduced to the minimum.

Connection Example

 

Downloads

User manual ver. 1.02

Pinout ver. 1.00

Pictures

The Channel Expansion hub adds up to four configurable analogue (or two digital and two analogue) channels without occupying or modifying any existing system channels.

The Aim Channel Expansion is a compact CAN device providing virtually endless data acquisition system expansion options. 

By using advanced CAN technology, wiring is simplified from four cables into just a single connection, thereby reducing possible and unnecessary points of failure. It is also possible - via Data Hub - to connect to the Master as many Channel Expansion as needed.

 

Technical Specifications

Dimensions: 123x30x23 mm
Weight: 97 g
Sampling Frequency: Programmable up to 100 Hz (depending on sensors)

The Aim MemoryKey, MXL/EVO Removable Memory Device, allows an immediate storage of data acquired by AiM loggers (MXL and EVO4), for transfer to a PC.      

With 32 Mb internal memory, MemoryKey can store data concerning many sessions

No more need to wait for data download from the logger to the PC: you just plug MemoryKey in MXL or EVO4 before the session and it will automatically store data sampled by the logger.

Once the session is over MemoryKey will immediately download data to your PC as a normal compact flash. In case you need to avoid interruptions during test or race session, just plug another MemoryKey in your logger and go on sampling data.

MemoryKey can be used in a very flexible way as you can unplug it from one vehicle logger and plug it in another, also with the engine running, without erasing or overwriting data concerning different sessions.

Each session, in fact, can be attributed to each vehicle unambiguously because MemoryKey automatically opens a session when is plugged in the logger and closes it when unplugged.

Technical Specifications

Dimensions 86x25x13.5 mm

Weight 30 g

Downloads

MemoryKey pinout

Pictures

 

 

 

The Aim GPS08 4 Pin GPS Module, is a special 4 Pin version of the GPS08, specifically designed for the Aim Smartycam HD Camera system.

Thanks to the Aim GPS08 Module for SmartyCam HD and Race Studio 3 software, as soon as you start your track session you can immediately sample lap and split times as well as speed, position and acceleration, all the information needed for engine tuning as well as for improving your driving technique. GPS technology represents a true revolution in car racing data acquisition.

Two satellite systems for top reliability and precision

The Aim GPS08 Module for SmartyCam HD is more precise than most of the existing GPS systems, as it has been designed to add to the GPS satellite's signal the Global Navigation Satellite (Glonass) system's signal.
With an average of almost twenty satellites working in conjunction, GPS08 guarantees a precision and a reliability simply not comparable to the old generation GPS systems.

The Benefits are Huge!

• An average of less than one meter tolerance, which means absolute precision in determining vehicle position in curves and when the finish line is very close to another track segment
• Satellite signal is locked very rapidly. A few seconds after switch-on, the GPS08 is ready to operate
• No risk of missing the signal anymore, as - in case of 'noise' or interference on one system - the other system will guarantee the signal continuity

 

 

With your track included in the Aim database, the GPS08 does it all by itself.

The Aim GPS08 Module for SmartyCam HDstores the finish line coordinates of hundreds of tracks all over the world. Opening Race Studio 3 you will see the huge list of tracks included in the Aim database, sorted by Nation, circuit and surface type: you will be able to create your own collections, adding/removing tracks as you wish.

Should your home track be missing, after one lap its coordinates will be automatically detected by GPS08 and - once downloaded onto your PC - you will be able to include it in your own tracklist. So, immediately after switch-on, Aim GPS08 Module for SmartyCam HD will determine its position, identify the track and start loading lap times. You do not need to configure anything before going to the track: GPS08 will do it all by itself.

 

Much More than just Lap Times!

The Aim GPS08 Module for SmartyCam HD samples ten times per second position, speed and lateral/in-line acceleration at any point of the track: all the data needed for a precise evaluation of vehicle and driver behaviour, which is the necessary step to improve performance. Thanks to GPS08, even the predictive lap time will be much more reliable: in any moment of your race, you will know your time gap vs. your best lap with absolute precision.

In The Box

Choice of 4 variations

• Smartycam HD GPS08 module 2m Cable X40GPS080M0200
• Smartycam HD GPS08 module 4m Cable X40GPS080M0400
• Smartycam HD GPS08 Roof version 2m Cable X40GPS080MR200
• Smartycam HD GPS08 Roof version 4m Cable  X40GPS080MR400

Key Features

Features

• GPS08 Motorcycle racing module guarantees a precision using an average of almost twenty satellites
• You do not need to configure anything before going to the track: GPS08 will do it all by itself.
• Satellite signal is locked very rapidly. A few seconds after switch-on, the GPS08 is ready to operate
• An average of less than one meter tolerance, which means absolute precision in determining vehicle position in curves and when the finish line is very close to another track segment
• No risk of missing the signal anymore

Technical specs

GPS08 Module
Dimensions: 64.8 x 53.2 x 19.7 mm
Weight: 60.5 g

GPS08 Module Roof version
Dimensions: 64.8 x 56.8 x 21.4 mm
Weight: 100 g

The Aim 719 male - 719 female Patch Lead is available in 6 length options. Aim Cables are engineered to perform in tough Motorsport environments.       

Options: 

719-719 50cm Patch lead
719-719 100cm Patch lead
719-719 150cm Patch lead
719-719 200cm Patch lead
719-719 250cm Patch lead
719-719 300cm Patch lead

Aim Technologies are committed to supplying professional engineers quality Motorsport products. The cables and accessories are well-engineered and designed for rigours of Motorsport.

The Aim 712-719 4 Pin patch lead 

Available in 500cm - 3000cm lengths

Aim Technologies are committed to supplying professional engineers quality Motorsport products. The cables and accessories are well-engineered and designed for rigours of Motorsport.

Aim Thermocouple TC - TC Yellow Patch Lead. These cables are available in 6 length options and designed and engineered for the rigours of Motorsport.     

Aim Technologies are committed to supplying professional engineers quality Motorsport products. Our cables and accessories are well-engineered and designed for rigours of Motorsport. Aim Technologies racing components are amongst the best in the industry today.

The Aim 712 Male - 712 Female 4 Pin Extension Cable. Available in 3 length options. Designed and Engineered to withstand the rigours of Motorsport.   

Aim Technologies are committed to supplying professional engineers quality Motorsport products. The cables and accessories are well-engineered and designed for rigours of Motorsport.

 

Aim Solo 2 DL CAN/RS232, CAN and 2m Power Cable Provides direct power and connects the Solo 2 DL via CAN Connection to Engine ECU.

Aim Technologies are committed to supplying, professional engineers quality Motorsport products. Our cables and accessories are well-engineered are designed for demanding Motorsport applications and the demands that racing puts on components and ours are amongst the best in the market place today.

The Aim Thermocouple Patch Lead, TC (Yellow) to 712 4 pin (Metal Binder Plug). Available in 6 length options. Engineered for the rigours of Motorsport.               

Aim Technologies are committed to supplying professional engineers quality Motorsport products. Our cables and accessories are well-engineered and designed for rigours of Motorsport. Aim Technologies racing components are amongst the best in the industry today.

Aim DTA S60 Interface Lead MXL EVO. Aim Looms, Cables, Connectors and Harnesses are highly engineered to withstand the intense rigours of the Motorsport environment.      

Aim developed special applications for many of the most popular ECUs. By special applications, we mean user-friendly systems which allow you to easily connect your ECU to our high tech data logger. You only need to install harness between the logger and the ECU.

Once connected, the logger displays (and/or records depending on the logger on the ECU data stream and configuration) values like RPM, engine load, throttle position (TPS), air and water temperatures, battery voltage, speed, gear, lambda value (air/fuel ratio) analogue channels

Aim RPM Coil Adapter Inductive. Designed for single-cylinder 2 or 4 stroke engines. It converts spark plug RPM induction signal into a square wave signal.         

Aim RPM Coil Adapter Inductive has been designed for installation on single-cylinder 2 or 4 strokes engines. It is a filter that converts RPM signal sampled by induction from the spark plug in a square wave signal. Images here below show the signal sampled by induction on the left and the square wave signal on the right.

 

Connection of inductive RPM adaptor

To install the adapter connect the plastic clip to the spark plug and the cables as follows:

• the black cable labelled "GND" to the device GND pin • the red cable labelled "9-15 VDC" to a +12V output (the battery positive pole for example)
• the blue cable labelled "RPM" to AiM device RPM input. 

Please always refer to each AiM device user manual or pin out for further information. All information are freely downloadable from download area of AiM website.

The drawing there below shows the adapter correctly installed.

Aim MXL Strada Optional Sensors Harness. Aim Looms, cables and Harnesses are highly engineered and designed to withstand the rigours of the intense Motorsport environment.         

Aim Technologies are committed to supplying professional engineers quality Motorsport products. Our cables and accessories are well-engineered and designed for rigours of Motorsport. Aim Technologies racing components, are amongst the best in the industry today.

Aim Technologies are committed to supplying professional engineers quality Motorsport products. The cables and accessories are well-engineered and designed for rigours of Motorsport.

Aim Technologies are committed to supplying professional engineers quality Motorsport products. The cables and accessories are well-engineered and designed for rigours of Motorsport.

 

Aim Technologies are committed to supplying professional engineers quality Motorsport products. The cables and accessories are well-engineered and designed for rigours of Motorsport.

Aim 712 Binder Plug 4 PIN Male

Aim Technologies are committed to supplying professional engineers quality Motorsport products. The cables and accessories are well-engineered and designed for rigours of Motorsport.

Aim 712 Binder Plug 5 PIN Female

Aim Technologies are committed to supplying professional engineers quality Motorsport products. The cables and accessories are well-engineered and designed for rigours of Motorsport.

Aim 719 Binder Plug Male

Aim Technologies are committed to supplying professional engineers quality Motorsport products. The cables and accessories are well-engineered and designed for rigours of Motorsport.

Aim Technologies are committed to supplying professional engineers quality Motorsport products. The cables and accessories are well-engineered and designed for rigours of Motorsport. 

Aim Brake Liner Pot 10mm. These small, lightweight but well-engineered cables, are amongst the best in the market place today. These are ideal for high precision data acquisition or control systems.

Aim Technologies are committed to supplying professional engineers quality Motorsport products. The cables and accessories are well-engineered and designed for rigours of Motorsport.