Brake Pressure Sensor Dash 3
Regular price £180.00The Aim Dash 3 Brake Pressure Sensor with 719 binder connector, is highly engineered for Motorsport to accurately monitor brake pressure levels for optimum performance.
This sensor is classed as an analogue sensor, so will use one analogue input on the logger or display.
Options:
- Brake Pressure Dash 3 0-100 BAR X05PSA00100B38
- Brake Pressure Dash 3 0-160 BAR
This can be used not only to see brake pressure, but allows you to see braking points both start and end also if the driver is getting tired when braking or the brake system is becoming in-effective,
Running this in conjunction with a throttle sensor also allows you to see coasting time which is the most important thing to reduce, so as to gain more lap time.
Extra Information.
Electrical Connections :
Red: +VB Supply
Blue : 0v Common
Yellow: Signal
Custom Sensor Information
0 bar: 500mv
100 bar: 4500mv
Supply voltage: 8-16 volts
Output: 0.5 – 4.5 volts
Connection to a 719 or 712 Binder Plug,
from the solder view, going to the logger
Top right pin 1: Signal
Bottom right pin : ground
Top Left pin 4: not connected
Bottom left pin 3: +VB – 12volts
Technical information
