The Aim M10 Brake Pressure Sensor with 719 binder connector, is highly engineered for Motorsport to accurately monitor brake pressure levels for optimum performance.
This is classed as an analog sensor and will use one analog input on the logger or display which can be used not only to see brake pressure, but allows you to see braking points both start and end.
You can also see if the driver is getting tired when braking during the race or the brake system is becoming in-effective. Running this in conjunction with a throttle sensor also allows you to see coasting time, the most important thing to reduce, to gain more lap time.
Electrical Connections :
Red: +VB Supply
Blue : 0v Common
Custom Sensor Information
0 bar: 500mv
100 bar: 4500mv
Supply voltage: 8-16 volts
Output: 0.5 – 4.5 volts
Connection to a 719 or 712 Binder Plug,
from the solder view, going to the logger
Top right pin 1: Signal
Bottom right pin : ground
Top Left pin 4: not connected
Bottom left pin 3: +VB – 12volts