Performance and data acquired can also be incremented adding up to eight expansion modules. The only difference between the two is the MXS is a compact 5″ display and Aim MXG 1.2 is a 7″ display, a better fit for wide cockpit installations.
With the CAN Output you can send messages directly to an existing CAN network in order to improve the range of vehicle control possibilities.
You choose the information you want displayed. There is a library of custom pages for you to choose from, and in case you don’t find one you like, you can make your own page in the RaceStudio 3 program.
The high resolution, 7” display has a 1000:1 contrast ratio. On top of that, the built in ambient light sensor will keep the brightness optimal in any weather/lighting conditions.
The MXG offers eight customizable RBG LED alarms. You get to choose the colour, frequency, conditions and the display text. These can be set up to meet your needs in the “Icons Management” tab in RaceStudio 3.
There are two digital outputs that can be automatically activated depending on the analogue or digital signals from the ECU. For example, they can be used to turn on or off a fan or additional lights when a certain event happens.
Instantly turn your display into a mirror camera. The 2 camera inputs on the MXG allow the driver to toggle between the gauges and rear-view camera via push-button command.
On top of the eight customizable alarms, the MXG comes with 10 RGB (red, green, blue) LED’s that can be personalised to any colour in any gear. It doesn’t get better than that.
Using the built-in CAN bus, you can add expansion modules to the MXG 1.2 to increment the performance and the data acquired:
Thanks to GPS08 Module (included in the kit) and its Race Studio 3 software, you can immediately get lap times and all data needed for engine tuning as well as for improving driving technique.
It permits to add 4 0-5Volt analogue channels for pressure, temperature sensors and potentiometers. Two of these channels can be configured to receive digital inputs like wheel speed.
It adds 4 K thermocouples.
Wide band Lambda controller LCU-One, with Bosch LSU 4.9 probe, providing all Air/Fuel data and lambda value, allows to perfectly tune the carburetion.
SmartyCam HD cameras
The on-board cameras that overlays on videos the data sampled by your logger.
Race Studio 3 is the heart of your Aim MXG 1.2 managing all your racing activities.
With Race Studio 3 you can create, modify, delete, import and export configurations with all channels, ECU drivers, Math channels, Display Pages, Digital outputs, Alarms, Shift Lights and all the expansions you need. You will also be able to manage the map of all your racing tracks and compare two laps watching the video recorded by SmartyCam HD cameras.
RaceStudio 3 is a great platform to see and analyze all your data from the ECU and the other various channels. The data is then displayed in graphs, histograms and tables, making is easy to track the changes you make. And best of all, it is completely free!
Makes it even more convenient to configure, calibrate, and download your data wirelessly, using a secure 802.11 WiFi connection: no need to move your PC close to the vehicle anymore, you can do it from your van up to 50 metres away.
Display : 7″ TFT
Resolution : 800×480 pixels
Contrast : 1,000:1
Brightness : 700cd/m2 – 1,100 Lumen
Ambient light sensor : Yes
Alarm LEDs : 8 RGB freely configurable
Shift lights : 10 integrated freely configurable RGB LEDs
CAN connections : 3
ECU connections : CAN, RS232 or K-Line
ECU compatibility : + 1,000 industry leading ECUs
Expansion CAN connection : GPS, Channel Expansion, Thermocouple Expansions, Lambda Controller, SmartyCam HD
Analogue inputs : 8 fully configurable, max 1,000 Hz each
Digital inputs : 4 Speed inputs, lap signal, coil RPM input
Digital outputs : 2 (1 A max each)
Second CAN : Yes
Wi-Fi connection : Yes
Accelerometer : Internal Three-axial ± 5G + Three-axial Gyroscope+ 3 axis magnetometer
Internal memory : 4 GB
Body : Anodized Aluminum
Pushbuttons : Metallic
Connectors : 2 Motorsport connectors + 1 Binder connector
Power consumption : 400 mA
Dimensions : 237×127.6×26 mm
Weight : 950 g
Waterproof : IP65